A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
pre cat M13A
- jackonlyjack
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 3111
- Thank you received: 706
12 years 1 day ago #129776
by jackonlyjack
pre cat M13A was created by jackonlyjack
just wondering if any of you guys have removed the pre cat
from your manifold
from your manifold
Please Log in or Create an account to join the conversation.
12 years 1 day ago - 12 years 1 day ago #129832
by kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Replied by kirkynut on topic pre cat M13A
I've seen someone using a sports manifold recently, which is just stainless pipes. I can't remember if that was on here or Auszookers. I think it was on here, possibly on a truck in My Jimny. It might have been on a single cam.
Kirkynut
Edit: Here it is: www.bigjimny.com/index.php/forum?view=to...id=6&id=55805#129535
It is stainless pipes but well crafted by Mysticrich. You'll have to contact him for more information.
Kirkynut
Edit: Here it is: www.bigjimny.com/index.php/forum?view=to...id=6&id=55805#129535
It is stainless pipes but well crafted by Mysticrich. You'll have to contact him for more information.
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Last edit: 12 years 1 day ago by kirkynut.
Please Log in or Create an account to join the conversation.
12 years 23 hours ago #129838
by Rhinoman
Some Suzukis and a bunch of motorcycles.
Replied by Rhinoman on topic pre cat M13A
I would be concerned about slowing gas velocity - the simple alternative would be to use an earlier manifold without the pre-cat.
Some Suzukis and a bunch of motorcycles.
Please Log in or Create an account to join the conversation.
- 410shotgun
- New Member
-
Less
More
- Thank you received: 0
12 years 16 hours ago #129871
by 410shotgun
Replied by 410shotgun on topic pre cat M13A
I did it on mine and it passed the mot
it was a little louder
it was a little louder
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
Topic Author
- Offline
- Platinum Member
-
Less
More
- Posts: 3111
- Thank you received: 706
12 years 15 hours ago #129874
by jackonlyjack
Did it give it a little more torque ?
Because I read somewhere you do
Plus if they start to deteriorate engine damage
will occur
Replied by jackonlyjack on topic pre cat M13A
410shotgun wrote: I did it on mine and it passed the mot
it was a little louder
Did it give it a little more torque ?
Because I read somewhere you do
Plus if they start to deteriorate engine damage
will occur
Please Log in or Create an account to join the conversation.
- 410shotgun
- New Member
-
Less
More
- Thank you received: 0
12 years 3 hours ago #129914
by 410shotgun
Replied by 410shotgun on topic pre cat M13A
it may have it did go well and sound better
I just took the manifold off broke the inside out
and put it back on
I just took the manifold off broke the inside out
and put it back on
Please Log in or Create an account to join the conversation.
Time to create page: 0.089 seconds
