A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Ignition barrel issues
- Littletinasoup
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
12 years 1 week ago #128813
by Littletinasoup
Ignition barrel issues was created by Littletinasoup
Today the key jammed in the ignition barrel and would not turn, we could take it in & out but it would not turn. Took the cap off the ignition barrel and angle grinded out the bottom of the steering lock. Now it starts and drives fine but can't get the cap on the ignition barrel and have no steering lock. Starting it off the ignition cap atm can I just replace the ignition assembly or does it need a new steering column? if there's any other ways around it please let me know! Tia
Please Log in or Create an account to join the conversation.
12 years 1 week ago #128815
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic Ignition barrel issues
I have a set of locks and an ignition barrel, you would need to bypass your immobiliser with your old key pin the key reader.
Or I have a full lock set including ecu etc depends on year and engine type
Or I have a full lock set including ecu etc depends on year and engine type
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
- suzuki jimny fella
- New Member
-
Less
More
- Thank you received: 0
12 years 1 week ago #128937
by suzuki jimny fella
Replied by suzuki jimny fella on topic Ignition barrel issues
i had a sticky ignition sprayed white grease in there to help the tumbler all ok now
Please Log in or Create an account to join the conversation.
- helijohn
- New Member
-
Less
More
- Thank you received: 0
12 years 1 week ago #129027
by helijohn
I can't understand the problem properly, got any pics??
Replied by helijohn on topic Ignition barrel issues
Littletinasoup wrote: Today the key jammed in the ignition barrel and would not turn, we could take it in & out but it would not turn. Took the cap off the ignition barrel and angle grinded out the bottom of the steering lock. Now it starts and drives fine but can't get the cap on the ignition barrel and have no steering lock. Starting it off the ignition cap atm can I just replace the ignition assembly or does it need a new steering column? if there's any other ways around it please let me know! Tia
I can't understand the problem properly, got any pics??
Please Log in or Create an account to join the conversation.
Time to create page: 0.087 seconds
