A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Code reader
- helijohn
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
12 years 1 week ago #128770
by helijohn
Code reader was created by helijohn
Please Log in or Create an account to join the conversation.
12 years 1 week ago #128772
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Code reader
Depends which Jimny you have
Sent from my Nexus 5 using Tapatalk
Sent from my Nexus 5 using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- helijohn
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
12 years 1 week ago #128773
by helijohn
It would be for a post 2001 car Martin.
Replied by helijohn on topic Re:Code reader
mlines wrote: Depends which Jimny you have
Sent from my Nexus 5 using Tapatalk
It would be for a post 2001 car Martin.
Please Log in or Create an account to join the conversation.
12 years 1 week ago #128784
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Code reader
Looks like a chinese clone of the Autel Maxiscan ms309.
I have one with Autel on the sticker
Works fine on my x plate twincam.
I have one with Autel on the sticker
Works fine on my x plate twincam.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
- helijohn
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
12 years 1 week ago #128787
by helijohn
There are other cheapies but I just wondered if this was worth spending a tenner on! I would be using it on other motors.
Replied by helijohn on topic Code reader
facade wrote: Looks like a chinese clone of the Autel Maxiscan ms309.
I have one with Autel on the sticker
Works fine on my x plate twincam.
There are other cheapies but I just wondered if this was worth spending a tenner on! I would be using it on other motors.
Please Log in or Create an account to join the conversation.
- 410shotgun
- New Member
-
Less
More
- Thank you received: 0
12 years 1 week ago #128826
by 410shotgun
Replied by 410shotgun on topic Code reader
my old code reader would work fine on the 2000 jimny
but would not work on some Vauxhalls and my new qubo
but the one you are on about works on it so worth £10 in my book
but would not work on some Vauxhalls and my new qubo
but the one you are on about works on it so worth £10 in my book
Please Log in or Create an account to join the conversation.
Time to create page: 0.096 seconds
