A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
thermostat location
- hirsty
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
20 Sep 2014 17:17 #124621
by hirsty
thermostat location was created by hirsty
Where thermostat on 1.3 jimny is it under intake manifold. At end if bottom hose on raditor or is it attach to top raditor hose. I think thermostat stuck closed. So need to take thermostat out test it.
Please Log in or Create an account to join the conversation.
- Vinnie
- New Member
-
Public
Less
More
- Thank you received: 0
20 Sep 2014 18:16 #124628
by Vinnie
It's under intake m8 I've gotta take mine out to check also,but I did take the air hose to inlet off to have a look and think it may be possible from there.
What's your symptoms ?
Vinnie
Replied by Vinnie on topic thermostat location
hirsty wrote: Where thermostat on 1.3 jimny is it under intake manifold. At end if bottom hose on raditor or is it attach to top raditor hose. I think thermostat stuck closed. So need to take thermostat out test it.
It's under intake m8 I've gotta take mine out to check also,but I did take the air hose to inlet off to have a look and think it may be possible from there.
What's your symptoms ?
Vinnie
Please Log in or Create an account to join the conversation.
- hirsty
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
20 Sep 2014 18:31 #124630
by hirsty
Replied by hirsty on topic thermostat location
Boil over. Top hose hot bottom luke warm. Some days it take ages to warm up. Other days warm up really quick.
Please Log in or Create an account to join the conversation.
- hirsty
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
26 Sep 2014 13:04 #125135
by hirsty
Replied by hirsty on topic thermostat location
Turn out to be faulty radiator cap all along got one from scrap yard today cost 2 quid
Please Log in or Create an account to join the conversation.
Time to create page: 0.462 seconds