A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

shaking while idling

  • steve001
  • Topic Author
  • New Member
  • New Member
    Public
More
12 Aug 2014 13:13 #121838 by steve001
shaking while idling was created by steve001
hi im no car expert but my jimny shakes while idling any ideas and is it safe to drive,it doesent do it while driving any info would be helpfull,thanks

Please Log in or Create an account to join the conversation.

  • Flameboi201
  • New Member
  • New Member
    Public
More
12 Aug 2014 14:11 #121842 by Flameboi201
Replied by Flameboi201 on topic shaking while idling
Sounds like a misfire . Could be a number of things but you could try taking the plug leads off 1 at a time . It should miss and wobble about as u take them off so if it stays the same youll know its that cylinder . Then check if u have a spark . Could be a coil pack on its way out or just the plug .

Please Log in or Create an account to join the conversation.

  • steve001
  • Topic Author
  • New Member
  • New Member
    Public
More
12 Aug 2014 16:57 #121855 by steve001
Replied by steve001 on topic shaking while idling
it dosent do it while driving along

Please Log in or Create an account to join the conversation.

  • Dave cc
  • New Member
  • New Member
    Public
More
12 Aug 2014 22:39 #121894 by Dave cc
Replied by Dave cc on topic shaking while idling
Check the obvious plug coil pack low cylinder compression would be my next check always manifests its self at idle first

Please Log in or Create an account to join the conversation.

More
13 Aug 2014 00:26 #121897 by j999pre
Replied by j999pre on topic shaking while idling
Ditto, an idle miss can sometimes clear as revs increase!

Gold Jimny the best colour (sold) :(

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

Time to create page: 0.150 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.