Convert push button to stick shift transfer box

I asked that before and the answer was 'we don't think so'. I have yet to look closely at an electric box to see. The other option is get someone who is handy with electronics to make a more ruthless shift controller- one that will crunch it through a bit more readily.

Busta wrote: a more ruthless shift controller- one that will crunch it through a bit more readily.

I don't understand why that is needed, is there an issue with the electronic controller? mine seem to work OK.

I've just been reading this and I'm insure as to how you know the prop shafts are different lengths, I have an 07 reg push button 4wd and a 51reg lever 4wd, the centre prop off the 51 reg pretty much fell apart so I used my prop off the 07 on it and got a replacement prop for the 51 plate off James off here and they fit both cars with no problems I'm yet to fit a stick 4wd to the 07 reg as I'm not sure of the switches I think they can be temperamental

Mines very temperamental with 4lo sometimes it will go in sometimes it won't and once when it was in it took over 30 min of pissing about going backwards forwards over mud , gravel etc to disengage, bloody thing just beeps and I've lost confidence in it to be honest, and I've spoken to a few people who have button selectors not just on jimnys and they all say the same, I think you can't go wrong with a lever, you can feel it in and out and you know it's done, I think they are like all car makes now just over complicating things, and I don't know why there's a need for elec gizmos like hand brakes etc

Best ask Rockwatt, PM him.

Gary

funkyjimny wrote: Best ask Rockwatt, PM him.

Gary

Already have a while back, and what it would cost to do what I want to mine it would be cheaper to get an older jimny that's been modded and keep mine as a daily driver, so saving for another jim