A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

engine swap

jord-92
Topic Author
New Member
Public

19 May 2014 08:02 #115692 by jord-92

engine swap was created by jord-92

Dose anyone know if the gearbox off the single cam g13b is the same as the twin cam m16a??

Please Log in or Create an account to join the conversation.

j999pre
Offline
Platinum Member
Registered

19 May 2014 08:03 #115693 by j999pre

Replied by j999pre on topic engine swap

It isn't

Gold Jimny the best colour (sold)

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

Jimny_Aus
New Member
Public

20 May 2014 01:13 #115792 by Jimny_Aus

Replied by Jimny_Aus on topic engine swap

if you search on here youll find evrything you need to know for an engine swap.... trust me :silly:

Please Log in or Create an account to join the conversation.

steffan
New Member
Public

20 May 2014 03:44 #115793 by steffan

Replied by steffan on topic engine swap

Or you could just speak with James aka j999 pre he's just done mine for me and what a top job he did

Please Log in or Create an account to join the conversation.

Dave cc
New Member
Public

20 May 2014 06:24 #115794 by Dave cc

Replied by Dave cc on topic engine swap

gearbox is totally different and if you are planning to run a twin cam on single cam management that wont work either you would also need to swap looms ecu etc etc etc

Please Log in or Create an account to join the conversation.

Time to create page: 0.884 seconds

engine swap

Events Menu