A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Ring and pinion, transfer case doubts

ATW1980
Topic Author
New Member
Public

20 Apr 2014 17:58 #112782 by ATW1980

Ring and pinion, transfer case doubts was created by ATW1980

Hey all,

Newbie question,

I brought a complete set of gears from a friend of mine..

Front and Rear ring and pinion..

transfer case gears

My friend was driving a JB43.. exact same model as mine..

I am facing a crisis now,

I could install the front ring and pinion. and the transfer case,, BUT the rear ring and pinion doesnt seem to fix into my rear axle..

I am puzzled because both of our models are the same.. JB43..

Anyone experience this before?

Please Log in or Create an account to join the conversation.

j999pre
Offline
Platinum Member
Registered

20 Apr 2014 20:08 #112804 by j999pre

Replied by j999pre on topic Ring and pinion, transfer case doubts

Was his a vvt or an automatic?

Gold Jimny the best colour (sold)

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

g r e e n
New Member
Public

21 Apr 2014 13:57 #112851 by g r e e n

Replied by g r e e n on topic Ring and pinion, transfer case doubts

ATW1980 wrote: BUT the rear ring and pinion doesnt seem to fix into my rear axle..

Why do you think so?

Please Log in or Create an account to join the conversation.

g r e e n
New Member
Public

21 Apr 2014 14:02 #112856 by g r e e n

Replied by g r e e n on topic Ring and pinion, transfer case doubts

Whole line of Jimnys from 1990 year has interchangeable rear R&Ps. It's always 7" ring with 10 mount holes with straight rotation.

Please Log in or Create an account to join the conversation.

ATW1980
Topic Author
New Member
Public

19 May 2014 18:43 #115754 by ATW1980

Replied by ATW1980 on topic Ring and pinion, transfer case doubts

Got them in and working fine..

Very very happy with this modification..

Low end .. Good torque and pick up.

Good cruising too... Makes highway driving very comfortable..

Am averaging 9.5 to 11km per litre now... And I am on 245/75/16" mt tires!

Please Log in or Create an account to join the conversation.

Busta
Offline
Platinum Member
Registered

19 May 2014 23:24 #115791 by Busta

Replied by Busta on topic Ring and pinion, transfer case doubts

So what parts have you used? Aftermarket parts or just swapping around Suzuki bits?

Please Log in or Create an account to join the conversation.

Time to create page: 3.604 seconds

Ring and pinion, transfer case doubts

Events Menu