A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
rusty jack tray
12 years 8 months ago #106760
by robs5230
standard jimny - for now
rusty jack tray was created by robs5230
can't see it being long before i have to repair the jack well. so i have a couple of questions for they that previously have.
1. any issues with welding the jack well as regards the fuel tank ?
2. i don't keep my jack in the well anyway so can anyone see any issues with just running flat across the boot floor with a repair panel ?
cheers
1. any issues with welding the jack well as regards the fuel tank ?
2. i don't keep my jack in the well anyway so can anyone see any issues with just running flat across the boot floor with a repair panel ?
cheers
standard jimny - for now
Please Log in or Create an account to join the conversation.
- idiotmobil
- New Member
-
Less
More
- Thank you received: 0
12 years 8 months ago #106765
by idiotmobil
Replied by idiotmobil on topic rusty jack tray
Just done mine posted some pics in the what you did today thread I welded mine fine with fuel tank in its far enough away
Please Log in or Create an account to join the conversation.
12 years 8 months ago #106767
by robs5230
standard jimny - for now
Replied by robs5230 on topic rusty jack tray
cheers for that . i did read your post. i'll be stick welding mine too
standard jimny - for now
Please Log in or Create an account to join the conversation.
- markyp2000
- New Member
-
Less
More
- Thank you received: 0
12 years 8 months ago #106770
by markyp2000
Replied by markyp2000 on topic rusty jack tray
As long as you cut the well out then plate it
Please Log in or Create an account to join the conversation.
12 years 8 months ago #106782
by robs5230
standard jimny - for now
Replied by robs5230 on topic rusty jack tray
yeah i'll be taking the whole well out then plating over . my list of jobs to do is building again. trying to book a day at my mate's workshop one coming sunday . got plans for a new rear bumper too.
standard jimny - for now
Please Log in or Create an account to join the conversation.
- helijohn
- New Member
-
Less
More
- Thank you received: 0
12 years 8 months ago #106890
by helijohn
I've got an old steel shelf somewhere so I'll do mine in a year ot two I guess. I'd like to hinge it though for access to the exhaust etc.
Replied by helijohn on topic rusty jack tray
robs5230 wrote: yeah i'll be taking the whole well out then plating over . my list of jobs to do is building again. trying to book a day at my mate's workshop one coming sunday . got plans for a new rear bumper too.
I've got an old steel shelf somewhere so I'll do mine in a year ot two I guess. I'd like to hinge it though for access to the exhaust etc.
Please Log in or Create an account to join the conversation.
Time to create page: 0.131 seconds
