A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
front shocks top tip
12 years 8 months ago #106632
by robs5230
standard jimny - for now
front shocks top tip was created by robs5230
if you are replacing your front shocks and they have been on a while just forget trying to undo the top bolt. the best you could hope for is for it to shear off. after 15 minutes of messing trying to stop the ram on the first side from turning out came the junior hacksaw.
straight through the base of the nut . 3 minutes to get it most way through then tapped off with a drift.
second side about 20 minutes start to finish.
nice new shocks all round now
straight through the base of the nut . 3 minutes to get it most way through then tapped off with a drift.
second side about 20 minutes start to finish.
nice new shocks all round now
standard jimny - for now
Please Log in or Create an account to join the conversation.
- Swifty
- New Member
-
Less
More
- Thank you received: 0
12 years 8 months ago #106644
by Swifty
Replied by Swifty on topic front shocks top tip
Or you could get the grinder out and do it in 30 seconds each side,
Please Log in or Create an account to join the conversation.
- idiotmobil
- New Member
-
Less
More
- Thank you received: 0
12 years 8 months ago #106647
by idiotmobil
Replied by idiotmobil on topic front shocks top tip
Or a nut splitter
Please Log in or Create an account to join the conversation.
- GuardianAngel
- New Member
-
Less
More
- Thank you received: 0
12 years 8 months ago #106648
by GuardianAngel
Replied by GuardianAngel on topic front shocks top tip
Bolt grippers and a big wrench
Please Log in or Create an account to join the conversation.
- BensJimny
- New Member
-
Less
More
- Thank you received: 0
12 years 8 months ago #106686
by BensJimny
Replied by BensJimny on topic front shocks top tip
And theres me, Mr delicate, on my knees for the past week with a spanner and a can of WD-40.. :blush:
Please Log in or Create an account to join the conversation.
Time to create page: 0.079 seconds
