A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Fitting castor correction bushes
- professor
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
12 years 9 months ago #102143
by professor
Fitting castor correction bushes was created by professor
what is the correct way of instaling them?
I have full front and rear bits4vits castor bush kit,i'v had a look online but it all looks a bit vague with no definitive
answers or measurements on the orientation
I have full front and rear bits4vits castor bush kit,i'v had a look online but it all looks a bit vague with no definitive
answers or measurements on the orientation
Please Log in or Create an account to join the conversation.
- dirtydogz
- New Member
-
Less
More
- Thank you received: 0
12 years 9 months ago #102166
by dirtydogz
Replied by dirtydogz on topic Fitting castor correction bushes
Please Log in or Create an account to join the conversation.
- professor
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
12 years 9 months ago #102170
by professor
Replied by professor on topic Fitting castor correction bushes
cheers mate
Please Log in or Create an account to join the conversation.
Time to create page: 0.074 seconds
