A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Rocklobster fitting
- Swifty
- Topic Author
- New Member
-
Public
25 Oct 2013 08:52 #87862
by Swifty
Rocklobster fitting was created by Swifty
So, how have you guys fitted the jimny 4WD connector pictured to the lobster box, the box just has two prongs on it.
Snip the wires and put some connectors that match the prongs?
I'd like the 4WD light to come on. At the moment I have auto hubs, but will be moving to manual if that matters. Cheers.
Snip the wires and put some connectors that match the prongs?
I'd like the 4WD light to come on. At the moment I have auto hubs, but will be moving to manual if that matters. Cheers.
Please Log in or Create an account to join the conversation.
- RichiesJimny
- New Member
-
Public
- Swifty
- Topic Author
- New Member
-
Public
25 Oct 2013 09:41 #87869
by Swifty
Replied by Swifty on topic Rocklobster fitting
So just a case of finding out where to get them from, 
cheers
cheers Please Log in or Create an account to join the conversation.
Time to create page: 0.164 seconds
