A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Uprated front shafts and cv's

gmogger
Topic Author
New Member
Public

08 Oct 2013 23:33 #85562 by gmogger

Uprated front shafts and cv's was created by gmogger

Hi this is my first post here, I am looking to upgrade my front shafts and cv's as i've just about run out of stock replacements.

I have contacted trailjimny and they want 1200 euro for and axle set which is ridiculous.

Any other suggestions as to a supplier who's more realistically priced?

Also i have seen quite a few of the american companys advertising shaft and cv's for samurias can these be made to fit a jimny front axle?

Please Log in or Create an account to join the conversation.

steffan
New Member
Public

09 Oct 2013 05:44 #85565 by steffan

Replied by steffan on topic Uprated front shafts and cv's

Try rockwatt on here or send off road armoury and enquiry am not really shore who sells them but would Be interested to no cost

Please Log in or Create an account to join the conversation.

TomDK
New Member
Public

09 Oct 2013 08:23 #85573 by TomDK

Replied by TomDK on topic Uprated front shafts and cv's

Zango.it makes them. Starting at 900Euro.

Please Log in or Create an account to join the conversation.

kirkynut
Offline
Moderator
Registered

09 Oct 2013 09:27 - 09 Oct 2013 09:29 #85576 by kirkynut

Replied by kirkynut on topic Uprated front shafts and cv's

TomDK wrote: Zango.it makes them. Starting at 900Euro.

Do you mean www.zanfi.it/modules.php?name=catalog&fi..._121&products_id=962

Kirkynut

The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Last edit: 09 Oct 2013 09:29 by kirkynut.

Please Log in or Create an account to join the conversation.

TomDK
New Member
Public

09 Oct 2013 09:32 #85577 by TomDK

Replied by TomDK on topic Uprated front shafts and cv's

Sorry, of course yes... Thanks :-D

Stupid phone :-)

Please Log in or Create an account to join the conversation.

safari
Offline
Elite Member
Registered

09 Oct 2013 11:49 #85595 by safari

Replied by safari on topic Uprated front shafts and cv's

all cv i found r rediculous expensive still waiting for jimny bits to start production and tell us the price, meanwhile try to change gears in transfer case or change it for a sj transfer case

if u worry u die if u dont worry u still die so why worry

Please Log in or Create an account to join the conversation.

Time to create page: 1.970 seconds

Uprated front shafts and cv's

Events Menu