A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Can I tow I tow a lightweight Caravan with a Jimny
- gilburton
- New Member
-

Public
Less
More
- Thank you received: 0
22 Nov 2013 18:33 #92642
by gilburton
Replied by gilburton on topic Can I tow I tow a lightweight Caravan with a Jimny
Are you drilling a hole in the wheel cover behind the plate for the wiring?
I might do that on mine then the plug can be behind the plate.
I might do that on mine then the plug can be behind the plate.
Please Log in or Create an account to join the conversation.
- Ruby2
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
22 Nov 2013 18:51 #92644
by Ruby2
Replied by Ruby2 on topic Can I tow I tow a lightweight Caravan with a Jimny
Yes the number plate wiring is fed through a hole between the centre of the bushes.
Please Log in or Create an account to join the conversation.
- gilburton
- New Member
-

Public
Less
More
- Thank you received: 0
22 Nov 2013 19:41 #92652
by gilburton
Replied by gilburton on topic Can I tow I tow a lightweight Caravan with a Jimny
You can also use your old number plate on the caravan
Please Log in or Create an account to join the conversation.
- Ruby2
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
27 Nov 2013 18:03 #93454
by Ruby2
Replied by Ruby2 on topic Can I tow I tow a lightweight Caravan with a Jimny
@Gilburton thanks for your help it's all done and wired in.
To be fair I used a speaker cable as it was two wires together, but I'm concerned about it rubbing through. I'm not too concerned with the load on the cable as the lights just a LED lamp so I doubt it'll use many amps.
So I may use thicker wire
Here are some pics now it's done.
Thanks again for your help
To be fair I used a speaker cable as it was two wires together, but I'm concerned about it rubbing through. I'm not too concerned with the load on the cable as the lights just a LED lamp so I doubt it'll use many amps.
So I may use thicker wire

Here are some pics now it's done.
Thanks again for your help
Please Log in or Create an account to join the conversation.
- gilburton
- New Member
-

Public
Less
More
- Thank you received: 0
27 Nov 2013 18:14 #93457
by gilburton
Replied by gilburton on topic Can I tow I tow a lightweight Caravan with a Jimny
Looks neat
Please Log in or Create an account to join the conversation.
- Ruby2
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
27 Nov 2013 18:41 #93461
by Ruby2
Replied by Ruby2 on topic Can I tow I tow a lightweight Caravan with a Jimny
Cheers 
gilburton wrote: Looks neat
Please Log in or Create an account to join the conversation.
Time to create page: 0.170 seconds
