A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
2low switch.
- jonesyba420
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
13 years 2 months ago - 13 years 2 months ago #82717
by jonesyba420
2low switch. was created by jonesyba420
I want to do this mod as described by busta here
www.bigjimny.com/index.php/forum/6-jimny...oday?start=888#82371
but im not sure if ive got a suitable switch?? any one able to advise me please, heres some pictures:
Last edit: 13 years 2 months ago by jonesyba420.
Please Log in or Create an account to join the conversation.
13 years 2 months ago #82724
by Busta
Replied by Busta on topic 2low switch.
As long as the switch stays in the on and off positions (e.g. not a momentary switch) it will be fine.
Please Log in or Create an account to join the conversation.
- JivingDaddy
- New Member
-
Less
More
- Thank you received: 0
13 years 2 months ago #82727
by JivingDaddy
Replied by JivingDaddy on topic 2low switch.
Please Log in or Create an account to join the conversation.
- jonesyba420
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
13 years 2 months ago #82728
by jonesyba420
Replied by jonesyba420 on topic 2low switch.
Feels like a sturdy switch buddy.
its a on off switch not a momentary one.
Gonna give it a go and ill report back.
its a on off switch not a momentary one.
Gonna give it a go and ill report back.
Please Log in or Create an account to join the conversation.
- JuanGuillie
- New Member
-
Less
More
- Thank you received: 0
13 years 2 months ago - 13 years 2 months ago #82731
by JuanGuillie
Try to find out what Amperage the original switches do have and make shure you do have at least the same amperage.

Because lack of space i could not mount the original ARB switch (without cutting to much into the dashboard).
Did throw away the ashtray (i'm a non-smoker) and did put my switches in it's place.
1 for compressor, 1 for ARB and 1 for working light's in the back.
They are 15 Amps with LED.
Very satisfied with them and i can see if their still on without loosing too much attention onto the road.
Replied by JuanGuillie on topic 2low switch.
Try to find out what Amperage the original switches do have and make shure you do have at least the same amperage.
Because lack of space i could not mount the original ARB switch (without cutting to much into the dashboard).
Did throw away the ashtray (i'm a non-smoker) and did put my switches in it's place.
1 for compressor, 1 for ARB and 1 for working light's in the back.
They are 15 Amps with LED.
Very satisfied with them and i can see if their still on without loosing too much attention onto the road.
Last edit: 13 years 2 months ago by JuanGuillie.
Please Log in or Create an account to join the conversation.
- JivingDaddy
- New Member
-
Less
More
- Thank you received: 0
13 years 2 months ago #82733
by JivingDaddy
This is what we want. Some right sturdy SAS nasty bas...... :laugh: :laugh:
Replied by JivingDaddy on topic 2low switch.
JuanGuillie wrote:
Try to find out what Amperage the original switches do have and make shure you do have at least the same amperage.
Because lack of space i could not mount the original ARB switch (without cutting to much into the dashboard).
Did throw away the ashtray (i'm a non-smoker) and did put my switches in it's place.
1 for compressor, 1 for ARB and 1 for working light's in the back.
They are 15 Amps with LED.
Very satisfied with them and i can see if their still on without loosing too much attention onto the road.
This is what we want. Some right sturdy SAS nasty bas...... :laugh: :laugh:
Please Log in or Create an account to join the conversation.
Time to create page: 0.100 seconds
