A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Cad drawing
- Bradford
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
18 Jun 2013 09:28 #74232
by Bradford
Cad drawing was created by Bradford
Does anyone have a cad drawing of Isuzu 1.7 diesel bell housing bolt holes
Please Log in or Create an account to join the conversation.
- adamatdraycott
- New Member
-
Public
Less
More
- Thank you received: 0
18 Jun 2013 11:19 #74248
by adamatdraycott
Replied by adamatdraycott on topic Cad drawing
No, but if you can get the details i can draw it up for you...
That is if you are wanting a cad file to get an adapter plate laser/water jet cut etc.
That is if you are wanting a cad file to get an adapter plate laser/water jet cut etc.
Please Log in or Create an account to join the conversation.
- Bradford
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
18 Jun 2013 11:32 #74254
by Bradford
Replied by Bradford on topic Cad drawing
Hi, thanks for offer, i can do drawing just need dims
Please Log in or Create an account to join the conversation.
18 Jun 2013 15:21 #74263
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic Cad drawing
Did you get your steering hoses etc?
Dave cc may have dimensions for you.
Dave cc may have dimensions for you.
Gold Jimny the best colour (sold)

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
- Bradford
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
18 Jun 2013 18:14 #74290
by Bradford
Replied by Bradford on topic Cad drawing
Was hoping to get complete assy in one go, but will keep you in mind, thanks for heads up i will attempt to contact him
Please Log in or Create an account to join the conversation.
Time to create page: 2.430 seconds