OMP internal rollcage

Dave cc wrote: According to Tom they are made to order going to mail them find out exactly what the gig is if all good will order 1 this week checked import thing dont seem any greif as coming from Europe. you dont have to fit the door bars or you can do as i have on my Starlet race car is hinge them dead easy to do but if you want to fix them for a competion just drop a bolt thru them

You're all too worried about all that import thing

When shopping inside EU there's nothing to worry about, at all

I'd worry more about the picture at the top of the page showing an SJ 413 as the SJ was called jimny in many markets

probably worth mentioning that we are going to be doing a fully bolt in 6 point internal cage with optional door bars, + we have been looking at add-ons such as brackets to sandwich the floor and weld to the chassis to make it MSA compliant if the customer so wishes.

We hope to have something to show/proto for the Donny show where we will also be displaying our new ORA demo Jimny.

I would have thought our new cage kit will fall in under the 600 quid mark easy enough without the optional MSA chassis brackets...

RB
ORA

darthloachie wrote: I'd worry more about the picture at the top of the page showing an SJ 413 as the SJ was called jimny in many markets

No need to worry.
The OMP cage fits nicely in a Jimny
www.bilgalleri.dk/galleri/215922-suzuki_jimny_4wd

How about this?

ybracing.co.uk/webimages/racing/rollcages/rframe.htm

Same OMP cage. Similar price

Perhaps more interesting for those of you living in the UK.