A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Help in identifying a plastic part

VAXXi
Topic Author
New Member
Public

11 Sep 2012 11:26 #47918 by VAXXi

Help in identifying a plastic part was created by VAXXi

I found this plastic part on the floor (driver's side). Does this look familiar to anyone, regarding where it might come from ?

Please Log in or Create an account to join the conversation.

VAXXi
Topic Author
New Member
Public

11 Sep 2012 11:27 - 11 Sep 2012 11:29 #47919 by VAXXi

Replied by VAXXi on topic Help in identifying a plastic part

Last edit: 11 Sep 2012 11:29 by VAXXi.

Please Log in or Create an account to join the conversation.

adamatdraycott
New Member
Public

11 Sep 2012 11:33 #47920 by adamatdraycott

Replied by adamatdraycott on topic Help in identifying a plastic part

Its the end cap off the end of one of the rails which the seat slides on.

Normally come off/break when someone treads on them getting in & out of the back

Please Log in or Create an account to join the conversation.

VAXXi
Topic Author
New Member
Public

11 Sep 2012 13:09 #47925 by VAXXi

Replied by VAXXi on topic Help in identifying a plastic part

Please Log in or Create an account to join the conversation.

VAXXi
Topic Author
New Member
Public

11 Sep 2012 13:27 #47927 by VAXXi

Replied by VAXXi on topic Help in identifying a plastic part

adamatdraycott wrote: Its the end cap off the end of one of the rails which the seat slides on.

Normally come off/break when someone treads on them getting in & out of the back

Aaah, got it. Thanks ! one more squeaky plastic to get rid of :laugh:

Please Log in or Create an account to join the conversation.

Obarno
Offline
Platinum Member
Registered

12 Sep 2012 08:33 #47966 by Obarno

Replied by Obarno on topic Help in identifying a plastic part

What a strange coincidence as one of these arrived on the floor of my car on Sunday, and I have been wondering where it came from!
So thank you very much for the info!

Manual VVT, 2 1/2" lift, ORA castor corrected arms, 2" ORA body lift, 4:1 transfer box, Uprated front shafts & CVs ERM , ARBs back & front 3.9 diffs, 6 point cage, ORA winch bumper - Superwinch EP9, ORA rear bumper, ORA axle truses, Diff guards ERM , TBR tank guard, Snorkel, Kumho KL71.30.9.50 15

Please Log in or Create an account to join the conversation.

Time to create page: 2.012 seconds

Help in identifying a plastic part

Events Menu