A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Fitting a U Joint
- Spendersjim
- New Member
-
Public
11 May 2016 07:08 #166540
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic Fitting a U Joint
Some later jimny props have the uj held in place by crimping of the actual uj yoke. These are the ones that would need the full prop to be replaced. The youngest I've seen one of these on was a 54 plate. If you have one of these then buy an earlier prop used and for new ujs to that.
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
Time to create page: 0.473 seconds