A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
OBD 2 Codes
- teafortwo0789
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
27 Dec 2011 20:33 #29325
by teafortwo0789
OBD 2 Codes was created by teafortwo0789
Hi, Are the Jimny OBD2 codes published anywhere? I've ordered a Scanner but I'm not sure if the codes come with the unit. Many thanks in anticipation.
Please Log in or Create an account to join the conversation.
- reaper
- New Member
-
Public
Less
More
- Thank you received: 0
27 Dec 2011 20:39 #29326
by reaper
Replied by reaper on topic Re: OBD 2 Codes
many of the bluetooth scanners connect to you phone /tablet or laptop then use that tinternet to tell you what the codes actually mean
or this is this \/ (bottom of page )
www.rhinopower.org/diag/cel.html
or this is this \/ (bottom of page )
www.rhinopower.org/diag/cel.html
Please Log in or Create an account to join the conversation.
- 247sniper
- New Member
-
Public
Less
More
- Thank you received: 0
27 Dec 2011 21:59 #29330
by 247sniper
Replied by 247sniper on topic Re: OBD 2 Codes
I have the codes from a genuine workshop manual if you get stuck mate. All you'll ever need
Give us a shout if you get stuck mate.
Steve.

Steve.
Please Log in or Create an account to join the conversation.
- reaper
- New Member
-
Public
Less
More
- Thank you received: 0
27 Dec 2011 22:57 #29339
by reaper
if you could scan them and add them here im sure it would help quite a few people out
Replied by reaper on topic Re: OBD 2 Codes
247sniper wrote: I have the codes from a genuine workshop manual if you get stuck mate. All you'll ever need
Give us a shout if you get stuck mate.
Steve.
if you could scan them and add them here im sure it would help quite a few people out

Please Log in or Create an account to join the conversation.
- 247sniper
- New Member
-
Public
Less
More
- Thank you received: 0
28 Dec 2011 09:03 #29350
by 247sniper
Replied by 247sniper on topic Re: OBD 2 Codes
Err ok then. I'm not really good on copying/attaching and all that! :blink: I'll have a go next week when I'm back at work and get one of the lads to help me out 
Steve.

Steve.
Please Log in or Create an account to join the conversation.
- doncarlyon
- New Member
-
Public
Less
More
- Thank you received: 0
28 Dec 2011 11:35 #29362
by doncarlyon
Replied by doncarlyon on topic Re: OBD 2 Codes
Please Log in or Create an account to join the conversation.
Time to create page: 1.151 seconds