A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
More fun and games
- grumpy22
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
12 Nov 2011 20:01 - 12 Nov 2011 20:02 #25620
by grumpy22
More fun and games was created by grumpy22
What a day!
Cam belt went very well once I'd got the crank pulley off. The rebuild took about 45 minutes
So I decided to investigate some pulling to the left under heavy braking. Usually a sticking calliper and so it turned out to be. But could I get the pin out? Took 3 hours of heat, plus gas pullers, lump hammers drifts, everything I know. Got it out in the end but made a bit of a mess of the sliding pin!,
Please look in the wanted section!
G
Cam belt went very well once I'd got the crank pulley off. The rebuild took about 45 minutes
So I decided to investigate some pulling to the left under heavy braking. Usually a sticking calliper and so it turned out to be. But could I get the pin out? Took 3 hours of heat, plus gas pullers, lump hammers drifts, everything I know. Got it out in the end but made a bit of a mess of the sliding pin!,
Please look in the wanted section!
G
Last edit: 12 Nov 2011 20:02 by grumpy22.
Please Log in or Create an account to join the conversation.
- v8dougie
- New Member
-
Public
Less
More
- Thank you received: 0
12 Nov 2011 23:42 #25648
by v8dougie
Replied by v8dougie on topic Re: More fun and games
Glad to hear the cambelt whet okay in the end!
Sorry to hear about the calliper issues, I guess I was very lucky when I stripped mine to solve the same fault!
Best of luck!
Sorry to hear about the calliper issues, I guess I was very lucky when I stripped mine to solve the same fault!
Best of luck!
Please Log in or Create an account to join the conversation.
Time to create page: 0.124 seconds