BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Urgent Help ...Procomps

  • ooky_123
  • Topic Author
  • New Member
  • New Member
    Public
More
03 Feb 2011 14:54 #10871 by ooky_123
Urgent Help ...Procomps was created by ooky_123
The JImny is in the garage having the front dampers changed for procomp ES1000's.
Having just opened the packet of nuts / cups etc, I seem to be minus one nut. Looking at the threar its a fine thread. Does anyone either have a spare nut or know the thread type ?

Given the hassle Jimnybits and I had with them getting delivery in the first place, I dont want to go down the route of contacting the manufacturer etc unless I have to..

I also cannot re-use the origional nuts as they had to be cut off to remove the old dampers

Please Log in or Create an account to join the conversation.

  • ooky_123
  • Topic Author
  • New Member
  • New Member
    Public
More
03 Feb 2011 20:12 #10896 by ooky_123
Replied by ooky_123 on topic Re: Urgent Help ...Procomps
Fixed !!!

Procomps have a unf fine thread ... Replacement nut located :) thankyou everyone that emailed / messages me. All sorted now

Please Log in or Create an account to join the conversation.

Time to create page: 0.133 seconds
Joomla template by a4joomla