A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Front turn signal plug
- danparry 91
- Topic Author
- Offline
- New Member
-
Registered
22 Sep 2025 11:22 #262049
by danparry 91
Front turn signal plug was created by danparry 91
I installed some new front led turn signals and had to wire in some load resistors
Anyway I used the tap connector that came with them and they were terrible so I then soldered in the resistor but the wires became abit messy and frayed after doing it a few time.
Can I buy replacement plugs?
They work fine now but im just not happy with the job i done
Anyway I used the tap connector that came with them and they were terrible so I then soldered in the resistor but the wires became abit messy and frayed after doing it a few time.
Can I buy replacement plugs?
They work fine now but im just not happy with the job i done
Please Log in or Create an account to join the conversation.
Time to create page: 0.185 seconds