A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Jimnybits manual hubs
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
13 Apr 2020 07:39 #221024
by jackonlyjack
Replied by jackonlyjack on topic Jimnybits manual hubs
I have the cheaper one's on mine 3+ years now
They've had some hammer over this time
As for removing the tight E10's
Put the socket on and give it a few good taps with an hammer
It helped with mine
(good tip) when the new hubs are fitted fill the M4 screw heads with waterproof grease
They've had some hammer over this time
As for removing the tight E10's
Put the socket on and give it a few good taps with an hammer
It helped with mine
(good tip) when the new hubs are fitted fill the M4 screw heads with waterproof grease
Please Log in or Create an account to join the conversation.
Time to create page: 0.453 seconds