A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Modifying Older Jimnys
11 Sep 2017 19:36 #184027
by furo
2004 Jimny Mode: General Grabber AT3s (215/75/R15); Trailmaster 2" Lift; Jimnybits Snorkel; Jimnybits Front and Rear Recovery Points; Suntop Roof Rack; AVM Manual Hubs; Stainless Steel Exhaust System (SOLD)
Modifying Older Jimnys was created by furo
Hi folks,
Very vague question here but how do you approach modifying your Jimnys from a financial point of view? How do you know when you've crossed the line between improving a trusty old Jimny to just throwing your money into a black hole? Do you have any clear rules on how to judge whether a project makes financial sense or not?
I have a 2004 Jimny with the expected surface rust underneath and a couple of small niggles, but it's generally been very reliable over the 2 years I've owned it and it's only done 67,000 miles. I've put a fair bit of money into it with various modifications and although I had been thinking about suspension spacers, after doing a lot of deep thinking I've taken the plunge and ordered a trailmaster 2" lift kit (hasn't arrived yet). I just keep thinking about whether I'm better off saving for a newer model or continuing to improve my current vehicle. I'd hate to fit the new lift kit and then have something catastrophic happen, but on the other hand there's a good chance that my current Jimny has a lot of life left in her if I treat her right.
I'd really like to hear about people's experience with this. Both with building up old Jimny's and the reasons why people have bought newer ones.
Many thanks!
Very vague question here but how do you approach modifying your Jimnys from a financial point of view? How do you know when you've crossed the line between improving a trusty old Jimny to just throwing your money into a black hole? Do you have any clear rules on how to judge whether a project makes financial sense or not?
I have a 2004 Jimny with the expected surface rust underneath and a couple of small niggles, but it's generally been very reliable over the 2 years I've owned it and it's only done 67,000 miles. I've put a fair bit of money into it with various modifications and although I had been thinking about suspension spacers, after doing a lot of deep thinking I've taken the plunge and ordered a trailmaster 2" lift kit (hasn't arrived yet). I just keep thinking about whether I'm better off saving for a newer model or continuing to improve my current vehicle. I'd hate to fit the new lift kit and then have something catastrophic happen, but on the other hand there's a good chance that my current Jimny has a lot of life left in her if I treat her right.
I'd really like to hear about people's experience with this. Both with building up old Jimny's and the reasons why people have bought newer ones.
Many thanks!
2004 Jimny Mode: General Grabber AT3s (215/75/R15); Trailmaster 2" Lift; Jimnybits Snorkel; Jimnybits Front and Rear Recovery Points; Suntop Roof Rack; AVM Manual Hubs; Stainless Steel Exhaust System (SOLD)
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 9375
- Thank you received: 1870
12 Sep 2017 04:58 #184041
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
Bellerophon (2024 grello van daily
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Modifying Older Jimnys
Mine was bought new. As it gets older more things need to be replaced so I am inclined to put money in and fit better than factory bits to it to increase its functionality for my use. As it gets older still i am increasingly inclined to keep it indefinitely simply because I know exactly what has been done to and with it. Starting again unless with another new one doesn't have the same peace of mind for me, other peoples problems.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
Bellerophon (2024 grello van daily
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1934
- Thank you received: 554
12 Sep 2017 17:14 #184058
by Riccy
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic Modifying Older Jimnys
I agree, better the devil you know :evil:
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
12 Sep 2017 17:29 #184061
by Busta
Replied by Busta on topic Modifying Older Jimnys
Lots of people seem happy to throw £££ at modifications without any hesitation. There are plenty of rotten Jimnys with extensive modifications being broken for parts. I sold my last Jimny as a standard car needing welding and engine work. 3 months later it was for sale again with 4 inches of lift and 31s...
Please Log in or Create an account to join the conversation.
- mickt
- New Member
-
Public
Less
More
- Thank you received: 0
12 Sep 2017 19:07 #184068
by mickt
Replied by mickt on topic Modifying Older Jimnys
There are numerous rust pits on the Jimny to check before spending too much unless you are a whizz with the welder. Search the forum for the details.
Please Log in or Create an account to join the conversation.
- fowleronline
- New Member
-
Public
Less
More
- Thank you received: 0
13 Sep 2017 10:17 #184077
by fowleronline
Replied by fowleronline on topic Modifying Older Jimnys
Always a matter of perspective I think.
I have just bought my first Jimny and it's 3 years older than yours. I've owned it less than a month and spent £100 on remedial welding which I knew was there. I've already had £100 worth of fun in it, and I have access to my first 4x4 ever.
I could have bought a Defender - but my pockets are not that deep. I could have bought a newer Jimny but chose not to.
I see a Jimny as a very practical but fun car. You can spend as much or as little as you want above basic consumables. As things get newer, parts and accessories become more expensive too - and more electronic generally!
I'm going to give it a real good service, and get 5 new tyres. I expect to get a lot of service and fun for this money, which I would have to spend on any car I bought. I am not worried about parking at the supermarket or getting a few scratches down a lane - If it was newer I would.
So I think your question is more about money you might have to spend rather than money you want to spend. You may have to spend money on an essential repair on your present Jimny or a newer one - you will not know. At the moment you have a car you know and trust, but as it gets older you worry (as I do) that it will fail, expensively.
Why not set aside the cost of the upgrade, and use it on mods (or repairs)? In the end you will have a Jimny you can love and trust, over an unknown quantity.
Unless you are trying to justify a new car to yourself (I do that too lol)
My philosophy anyway! Love the devil you know.
I have just bought my first Jimny and it's 3 years older than yours. I've owned it less than a month and spent £100 on remedial welding which I knew was there. I've already had £100 worth of fun in it, and I have access to my first 4x4 ever.
I could have bought a Defender - but my pockets are not that deep. I could have bought a newer Jimny but chose not to.
I see a Jimny as a very practical but fun car. You can spend as much or as little as you want above basic consumables. As things get newer, parts and accessories become more expensive too - and more electronic generally!
I'm going to give it a real good service, and get 5 new tyres. I expect to get a lot of service and fun for this money, which I would have to spend on any car I bought. I am not worried about parking at the supermarket or getting a few scratches down a lane - If it was newer I would.
So I think your question is more about money you might have to spend rather than money you want to spend. You may have to spend money on an essential repair on your present Jimny or a newer one - you will not know. At the moment you have a car you know and trust, but as it gets older you worry (as I do) that it will fail, expensively.
Why not set aside the cost of the upgrade, and use it on mods (or repairs)? In the end you will have a Jimny you can love and trust, over an unknown quantity.
Unless you are trying to justify a new car to yourself (I do that too lol)

My philosophy anyway! Love the devil you know.
Please Log in or Create an account to join the conversation.
Time to create page: 1.285 seconds