BigJimny Store
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
[img
logo.

Aftermarket hubs or samurai used hubs for jimny

  • Albanianjimny
  • Topic Author
  • New Member
  • New Member
    Public
More
23 May 2013 17:33 #71470 by Albanianjimny
Aftermarket hubs or samurai used hubs for jimny was created by Albanianjimny
This forum convinced me to buy a jimny as my fisrt offroad car, and im shure i canget some good help here.Hubs dont lock. Light flashes. Hubs are ok, no rost under the car. Low gears do activate perfectly..lets make it short i know about the options....vacuums, solenoids etc...if i get samurai hubs from an accidented car here in albania(we all use this method for spare partshere)what do i have do besides installing some spacers? How good are these aftermarketvmanual hubs that i see on ebay and jimnybits.com .....i really dont want to repair the vacuum problem. Its so annoying. I dont have time to run from car mech to another one. Please help. I rely on this forum only...

Please Log in or Create an account to join the conversation.

  • vitara_mad
  • New Member
  • New Member
    Public
More
23 May 2013 17:42 #71472 by vitara_mad
Replied by vitara_mad on topic Aftermarket hubs or samurai used hubs for jimny
all you need is the manual hubs from the samurai with the cone washers off the bolts & a set of spacers

Please Log in or Create an account to join the conversation.

  • Albanianjimny
  • Topic Author
  • New Member
  • New Member
    Public
More
23 May 2013 17:46 #71473 by Albanianjimny
Replied by Albanianjimny on topic Aftermarket hubs or samurai used hubs for jimny
What about this 27 spline legend? Thank you for your reply!

Please Log in or Create an account to join the conversation.

  • badboy-jimny
  • New Member
  • New Member
    Public
More
23 May 2013 19:18 #71480 by badboy-jimny
Replied by badboy-jimny on topic Aftermarket hubs or samurai used hubs for jimny
Do as vitara mad says, vacuum system is rubbish.
I think I got my manual hubs from you vitaramad didnt I? Work a treat

Please Log in or Create an account to join the conversation.

More
23 May 2013 21:45 #71511 by kirkynut
Replied by kirkynut on topic Aftermarket hubs or samurai used hubs for jimny
The factory fixed hubs off a Vitara fit without spacers, it means the front axle is always spinning but that's no great problem other than slightly more wear and fuel consumption but I don't notice it on mine with them on!

Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Please Log in or Create an account to join the conversation.

Time to create page: 0.196 seconds
Joomla template by a4joomla