A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Gearbox Drain plug
- Darren Hall
- Topic Author
- New Member
-
Public
- GuardianAngel
- New Member
-
Public
- UKDAN
- New Member
-
Public
- mudman
- New Member
-
Public
- GuardianAngel
- New Member
-
Public
18 May 2013 20:39 #71021
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic Gearbox Drain plug
10mm square.
If you use a 3/8 and the plug is tight, the 3/8 will go round, and it makes the vaguely square hole all round too, then nothing will fit except a hammer and chisel. :dry:
Having said that, I use a 3/8 like everybody else
If you use a 3/8 and the plug is tight, the 3/8 will go round, and it makes the vaguely square hole all round too, then nothing will fit except a hammer and chisel. :dry:
Having said that, I use a 3/8 like everybody else
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
Time to create page: 0.394 seconds