A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

winch bumper fitting

jimnybob
Topic Author
New Member
Public

08 Mar 2013 22:03 #65017 by jimnybob

winch bumper fitting was created by jimnybob

has anyone got the fitting instructions for the ora front winch bumper?? any threads? :S thanks in advance

Please Log in or Create an account to join the conversation.

markyp2000
New Member
Public

08 Mar 2013 22:30 #65021 by markyp2000

Replied by markyp2000 on topic winch bumper fitting

Is there not a pdf on there web site for it

Please Log in or Create an account to join the conversation.

markyp2000
New Member
Public

08 Mar 2013 22:33 #65022 by markyp2000

Replied by markyp2000 on topic winch bumper fitting

Just looked on there web site it tell you how to fit it where the bumper is listed

Please Log in or Create an account to join the conversation.

jimnybob
Topic Author
New Member
Public

08 Mar 2013 22:50 #65024 by jimnybob

Replied by jimnybob on topic winch bumper fitting

totally missed that :lol: gives me a better idea but its a bit vague though. has anybody got any pictures of the main mounting brackets as im not sure if mine have been cut

Please Log in or Create an account to join the conversation.

BigMat
New Member
Public

09 Mar 2013 03:29 #65028 by BigMat

Replied by BigMat on topic winch bumper fitting

Got a few of mine here if it helps?

Please Log in or Create an account to join the conversation.

Jason
New Member
Public

09 Mar 2013 06:00 #65029 by Jason

Replied by Jason on topic winch bumper fitting

Hello just saw you question. Me i have just installed the new ORA front and back bumpers. So if you need contact me and i will see if i can help. My jimny is a 2010, 2" trail master lift, ORA front and back bumpers, tabor 9k winch. On the ORA site they have a pdf for a winch plate, the front bumper set up is roughly the same. You will need a disk cuter, drill, and n19 wrenches and about a days work for the front with winch. Good luck.

Please Log in or Create an account to join the conversation.

Time to create page: 0.161 seconds

winch bumper fitting

Events Menu