A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
195/80/15 will these fit a standard jimny?
- thesmi
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
19 Feb 2013 20:45 #63231
by thesmi
195/80/15 will these fit a standard jimny? was created by thesmi
been doing a lot of reading and really confused reading stuff about 5% etc
but will these tyres in mud terrain 195/80/15
fit on a bog standard jimny on alloys can be seen here on ebay 111010705105
hope so as my friend who i go out shooting with has won these on ebay for our shooting wagon
im a bit concerned they are too high
but will these tyres in mud terrain 195/80/15
fit on a bog standard jimny on alloys can be seen here on ebay 111010705105
hope so as my friend who i go out shooting with has won these on ebay for our shooting wagon
im a bit concerned they are too high
Please Log in or Create an account to join the conversation.
- thesmi
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
19 Feb 2013 20:54 #63234
by thesmi
Replied by thesmi on topic 195/80/15 will these fit a standard jimny?
one more question, can i use the wheel nuts that go on my steel wheels on the new alloys
ta
ta
Please Log in or Create an account to join the conversation.
- Blissett
- New Member
-
Public
Less
More
- Thank you received: 0
19 Feb 2013 20:55 #63235
by Blissett
Replied by Blissett on topic 195/80/15 will these fit a standard jimny?
Tyres size you will be ok on standard jimny..... But they don't look dished enough so you may need spacers to clear the calipers...
Please Log in or Create an account to join the conversation.
- thesmi
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
19 Feb 2013 20:57 #63237
by thesmi
Replied by thesmi on topic 195/80/15 will these fit a standard jimny?
didnt really want to widen it to much as heard it can eat the wheel bearings
Please Log in or Create an account to join the conversation.
- stevenb
- New Member
-
Public
Less
More
- Thank you received: 0
19 Feb 2013 21:07 #63239
by stevenb
Replied by stevenb on topic 195/80/15 will these fit a standard jimny?
i recognise this name from some were mm
Please Log in or Create an account to join the conversation.
- little jimny
- New Member
-
Public
Less
More
- Thank you received: 0
19 Feb 2013 21:11 #63242
by little jimny
Replied by little jimny on topic 195/80/15 will these fit a standard jimny?
I bought a set of Vitara alloys and they were a very tight fit, so much so that the clip on weights on the inside of the rim fouled on the steering arm (had to get them taken off and the wheels rebalanced with stick on weights). The offset on them was ET20 compared to the standard Jimny wheels that have zero offset. If your new wheels are the same offset as the Vitara wheels I had, then 20mm spacers will just move them out to the same place standard wheels sit, so they shouldn't have any effect on the bearings.
Please Log in or Create an account to join the conversation.
Time to create page: 0.220 seconds