A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Jimny upgrade

More
26 Mar 2011 22:34 #14104 by 1390_taz
Jimny upgrade was created by 1390_taz
Will wheels from a daihatsu fourtrak fit a jimny:)

Please Log in or Create an account to join the conversation.

  • vitara_mad
  • New Member
  • New Member
    Public
More
26 Mar 2011 23:10 #14105 by vitara_mad
Replied by vitara_mad on topic Re: Jimny upgrade
the stud pattern is the same so as long as they clear calipers & steering arms should be ok

Please Log in or Create an account to join the conversation.

More
26 Mar 2011 23:35 #14108 by mcjimny
Replied by mcjimny on topic Re: Jimny upgrade
They fit fine, the ugly steel ones don't offer much more offset or width(as i found out) but its an improvement if you can get them cheap (£15 a set for me!) I think sportrak and fourtrak alloys are a better offset.

Ooky had some on a while ago, when i was looking about for pictures on here of some i noticed it.

Black Jimny's don't get stuck!

Please Log in or Create an account to join the conversation.

  • adamjimny
  • New Member
  • New Member
    Public
More
27 Mar 2011 04:56 #14110 by adamjimny
Replied by adamjimny on topic Re: Jimny upgrade
look out for the modulars as i did as they are 8" wide :woohoo:

Please Log in or Create an account to join the conversation.

Time to create page: 1.483 seconds
Joomla template by a4joomla