An area for non Suzuki Jimny related chat. Keep it clean etc. as this is a public forum with young readers.
Paint
- Daniel30
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
13 Feb 2017 14:22 #177969
by Daniel30
Paint was created by Daniel30
Please Log in or Create an account to join the conversation.
13 Feb 2017 15:17 #177970
by Keithy
It can be removed easy enough....paint plane then flat and polish......unless you're ham fisted and ruin the whole area and have to spend millions to get it painted...:evil:
Please Log in or Create an account to join the conversation.
- Daniel30
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
13 Feb 2017 15:41 - 13 Feb 2017 15:42 #177971
by Daniel30
Replied by Daniel30 on topic Paint
A paint plane ? :blink:
I'd better get saving :woohoo: :woohoo:
I'd better get saving :woohoo: :woohoo:
Last edit: 13 Feb 2017 15:42 by Daniel30.
Please Log in or Create an account to join the conversation.
- paradox1001
- New Member
-

Public
Less
More
- Thank you received: 0
27 Mar 2017 16:33 #179710
by paradox1001
Replied by paradox1001 on topic Re:Paint
If you wrap masking tape around either side of a Stanley blade to leave a gap in the middle
You can then use it to cut the bulk of the run out without damaging the surrounding paintwork
Then use 2000 grade wet and dry to level the remains of the run out
Then use a cutting compound to finish and blend it in
You can then use it to cut the bulk of the run out without damaging the surrounding paintwork
Then use 2000 grade wet and dry to level the remains of the run out
Then use a cutting compound to finish and blend it in
Please Log in or Create an account to join the conversation.
- Daniel30
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
27 Mar 2017 16:43 #179711
by Daniel30
Replied by Daniel30 on topic Re:Paint
Thanks for the information I'm waiting for the good weather and a day to myself ( ha ha ha ha) then I'm going to attempt it
Please Log in or Create an account to join the conversation.
Time to create page: 0.164 seconds
