×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
M13A 2003
- leeds83
- Topic Author
- Visitor
-
Public
02 Oct 2017 08:58 #184728
by leeds83
M13A 2003 was created by leeds83
Hi Guys
Just question to any experts out there.
I'm replacing a 2003 DOCH Jimny engine and looking on Ebay there are few about, but checking that any of the 00-05 M13A will be exactly the same and fit straight in.
Not sure if my engine has a belt apposed to a chain and this makes any difference?
Also any tips would be useful from anyone who's done a swap, reason for replacing is it overheated and no compression.
Just question to any experts out there.
I'm replacing a 2003 DOCH Jimny engine and looking on Ebay there are few about, but checking that any of the 00-05 M13A will be exactly the same and fit straight in.
Not sure if my engine has a belt apposed to a chain and this makes any difference?
Also any tips would be useful from anyone who's done a swap, reason for replacing is it overheated and no compression.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8817
- Thank you received: 1763
- Points: 36295.00
- leeds83
- Topic Author
- Visitor
-
Public
02 Oct 2017 09:33 #184730
by leeds83
Replied by leeds83 on topic M13A 2003
How to I check if it's VVT or not?
Thanks
Thanks
Please Log in or Create an account to join the conversation.
- leeds83
- Topic Author
- Visitor
-
Public
02 Oct 2017 09:47 #184731
by leeds83
Replied by leeds83 on topic M13A 2003
My other problem is breakers keep telling me my engine code is g13bb. It can't possibly be at it's DOHC for a start.
Any suggestions why I'm getting this info.
Any suggestions why I'm getting this info.
Please Log in or Create an account to join the conversation.
02 Oct 2017 10:49 #184732
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Message me your registration number and I will tell you the recorded engine fitted.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
02 Oct 2017 11:34 - 02 Oct 2017 11:36 #184733
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
That registration number you sent shows it as a G13BB which is strange as it is a Japanese built vehicle which should not have this engine this late.
However it is possible the dealer made an error when registering the vehicle.
Best way to verify is to post a picture of the engine.
Martin
However it is possible the dealer made an error when registering the vehicle.
Best way to verify is to post a picture of the engine.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 02 Oct 2017 11:36 by mlines.
Please Log in or Create an account to join the conversation.
- leeds83
- Topic Author
- Visitor
-
Public
02 Oct 2017 11:38 #184734
by leeds83
Replied by leeds83 on topic M13A 2003
Thanks for getting back to me
Does the G13BB have DOHC 16v version?
Does the G13BB have DOHC 16v version?
Please Log in or Create an account to join the conversation.
02 Oct 2017 12:01 #184735
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
No - its SOHC 16valve
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- leeds83
- Topic Author
- Visitor
-
Public
02 Oct 2017 12:12 #184736
by leeds83
Replied by leeds83 on topic M13A 2003
Thanks for confirming Martin
Mine is certainly an M13A engine 100% in that case. It's looks totally different from the G13BB. It's strange it comes back with that engine code.
This site seems to think it's M13A too:
www.proxyparts.com/wiki/engine-codes/make/suzuki/model/jimny/
Mine is certainly an M13A engine 100% in that case. It's looks totally different from the G13BB. It's strange it comes back with that engine code.
This site seems to think it's M13A too:
www.proxyparts.com/wiki/engine-codes/make/suzuki/model/jimny/
Please Log in or Create an account to join the conversation.
- leeds83
- Topic Author
- Visitor
-
Public
02 Oct 2017 12:16 #184738
by leeds83
Replied by leeds83 on topic M13A 2003
See Below
Please Log in or Create an account to join the conversation.
02 Oct 2017 12:38 #184739
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
THat is certainly an M13A which is correct for the model/year.
I guess the dealer put the wrong engine on the registration form.
I guess the dealer put the wrong engine on the registration form.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8817
- Thank you received: 1763
- Points: 36295.00
Time to create page: 0.122 seconds