BigJimnyMeet (North) 2024 (12 Jan 2024)
14th July 2024
Parkwood Nr. Leeds
Click HERE for details
Change defect dashlights
- funny16
- Topic Author
- Visitor
-
Public
Can somebody tell me how I can change the dashlights behind my knobs 2wd-4wd-4wd/L .
They all are not burning ( as shown on the 'bad' photo , sorry )
They all three are not working. So maybe its a defect cable.
I have the spareparts T5 bulbs from Philips.
I know how to get off the frontpanel, thats not the problem, but after that..what to do?
Maybe somebody have photo's of it??? ( my technical english is not so very good.. )
Anyway Thanks!
greets
stanny
Please Log in or Create an account to join the conversation.
- Posts: 4706
- Thank you received: 260
- Points: 495.00
Please Log in or Create an account to join the conversation.
- andyf
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- funny16
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- andyf
- Visitor
-
Public
Not sure if you've figured it out but pretty simple, once you've taken the facia off, stick your hand round the back and the housing for the switches can be un-clipped and pushed out. There's 4 clips, 2 at either end, push them in and push the switches forward into the car. Turn housing upside down and unclip the wire. You will 2 brown plastic screws, this is the bulbs, turn it slightly, give a tap and the bulb will come out.
Now only problem as they are not the ones you've a picture of and I've no idea where to get them from other than suzuki no doubt.
Please Log in or Create an account to join the conversation.
- funny16
- Topic Author
- Visitor
-
Public
andyf wrote: Stanny,
Not sure if you've figured it out but pretty simple, once you've taken the facia off, stick your hand round the back and the housing for the switches can be un-clipped and pushed out. There's 4 clips, 2 at either end, push them in and push the switches forward into the car. Turn housing upside down and unclip the wire. You will 2 brown plastic screws, this is the bulbs, turn it slightly, give a tap and the bulb will come out.
Now only problem as they are not the ones you've a picture of and I've no idea where to get them from other than suzuki no doubt.
Hai Andy,
Thanks for your replay
I gonna try it next week, take my camera by the hand for photo's.
Will do my best. The bulbs I showed are fitted behind the cold/hot knob.
from there i changed one, it was the philips as shown.
grt
funn
Please Log in or Create an account to join the conversation.
- Posts: 4706
- Thank you received: 260
- Points: 495.00
andyf wrote: Stanny,
Not sure if you've figured it out but pretty simple, once you've taken the facia off, stick your hand round the back and the housing for the switches can be un-clipped and pushed out. There's 4 clips, 2 at either end, push them in and push the switches forward into the car. Turn housing upside down and unclip the wire. You will 2 brown plastic screws, this is the bulbs, turn it slightly, give a tap and the bulb will come out.
Now only problem as they are not the ones you've a picture of and I've no idea where to get them from other than suzuki no doubt.
Sounds good but I think I need a picture guide.
Please Log in or Create an account to join the conversation.
- funny16
- Topic Author
- Visitor
-
Public
funny16 wrote:
andyf wrote: Stanny,
Not sure if you've figured it out but pretty simple, once you've taken the facia off, stick your hand round the back and the housing for the switches can be un-clipped and pushed out. There's 4 clips, 2 at either end, push them in and push the switches forward into the car. Turn housing upside down and unclip the wire. You will 2 brown plastic screws, this is the bulbs, turn it slightly, give a tap and the bulb will come out.
Now only problem as they are not the ones you've a picture of and I've no idea where to get them from other than suzuki no doubt.
Hai Andy,
Thanks for your replay
I gonna try it next week, take my camera by the hand for photo's.
Will do my best. The bulbs I showed are fitted behind the cold/hot knob.
from there i changed one, it was the philips as shown.
grt
funn
These fitting are used in my dashboard. ( i search for a photo. )
Please Log in or Create an account to join the conversation.
- andyf
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- funny16
- Topic Author
- Visitor
-
Public
andyf wrote: Nope not the same, will try to get a photo up on here.
oke, i'am curious to know.
thanks!
Please Log in or Create an account to join the conversation.
- andyf
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- jimothy
- Visitor
-
Public
Please Log in or Create an account to join the conversation.