BigJimnyMeet (North) 2024 (12 Jan 2024)
14th July 2024
Parkwood Nr. Leeds
Click HERE for details
jimny leaning to one side?
- Madge
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Posts: 2185
- Thank you received: 153
- Points: 5.00
The easy fix is to fit 1 spring spacer to that corner.
www.bits4vits.co.uk/store/jimny/spring-s...y-lean-/prod_43.html
I use 4 of these spacers to compensate for the extra weight of my roll cage on top of my +3 lift springs.
Please Log in or Create an account to join the conversation.
- Beano
- Visitor
-
Public
Mine was leaning too so i bagged me one of these bad boys from bits4vits and fitted it yesterday. £24 and problem solved!
Beano
Please Log in or Create an account to join the conversation.
- Madge
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Beano
- Visitor
-
Public
Technical error! cant submit the attached picture for some reason!
Doh!
Please Log in or Create an account to join the conversation.
- Beano
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Posts: 2185
- Thank you received: 153
- Points: 5.00
Madge wrote: hi thanks yer i have a role cage and offroad armoury front winch bumper with winch you think fitting one of these spacers to the front left will work? would i need to get 4 like you have as got all the extra weight thanks matt
You only need 1 to level it, If you use 4 you will only compensate for the sagging of the springs. My offside front spring is longer so my jimny sits level, I just wanted the height after adding ORA bumper, winch, cage ect.
Please Log in or Create an account to join the conversation.
- suzuki jimny fella
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Posts: 2185
- Thank you received: 153
- Points: 5.00
I also added a 2" body lift to give me more arch clearance.
Please Log in or Create an account to join the conversation.
- suzuki jimny fella
- Visitor
-
Public
was going to start a topic about this but will ask now fella
i have got +3" lift and 3" cc arms but if i put them 1.25 spacers in could i get away with putting in cc bushes in
just a thought lol lol
or will it be ok with 3" cc arms
Please Log in or Create an account to join the conversation.
- Posts: 2185
- Thank you received: 153
- Points: 5.00
Please Log in or Create an account to join the conversation.
Jimmy lean is to the drivers side, the right hand side. You say its leaning left??
Sent from my HP Touchpad using Tapatalk 2
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.