Re:Gadget's 2019 hearing aid SZ5

Not touching the engine bay, just the cabin on mine.

stiffsteve204me wrote:

Gadget wrote: My job for tomorrow!

Something else to add to Andy's list. :laugh:

Just behind the door trims, Gadget?

---

LOL... Just.... LOL.

Duly noted, and added to the "priority purchase list". Very good idea gadget man Thx.


Steve.

stiffsteve204me wrote:

GeorgeC wrote: OK, in the engine bay, under the bonnet surface, do you have any insulation?
I have lots of holes where insulation can be mounted, but no, just the painted surface.
Am I missing something? No kit listed in the Accessories list, UK or AUS.

Edit: Someone will ask the "Why" question, they always do. Well, I do a battery resting voltage check each Saturday at 11:00 and have this big naked painted surface in my face!

Non on the underside of the bonnet, George.

Steve.

Holy smokes Steve!!!!!

I have just opened by own bonnet ...... And there is no engine!! Just 4 Beavers on hamster wheels!! Where was my petrol going??

Andy2640 wrote:

stiffsteve204me wrote:

GeorgeC wrote: OK, in the engine bay, under the bonnet surface, do you have any insulation?
I have lots of holes where insulation can be mounted, but no, just the painted surface.
Am I missing something? No kit listed in the Accessories list, UK or AUS.

Edit: Someone will ask the "Why" question, they always do. Well, I do a battery resting voltage check each Saturday at 11:00 and have this big naked painted surface in my face!

Non on the underside of the bonnet, George.

Steve.

Holy smokes Steve!!!!!

I have just opened by own bonnet ...... And there is no engine!! Just 4 Beavers on hamster wheels!! Where was my petrol going??

Beaver are well known for drinking petrol, Andy. It's why they are able to get the wheels spinning.




Steve.

Pmsl :laugh: :laugh: :laugh:

Whats the motoring world coming too! I better take care of them little buggers now then. God knows where i take it for a service!! Pets at home?? Weird! Lol hahaha :woohoo: :woohoo:

Took me 6hrs today to strip/line/reassemble the rear wings, rear floor and both front doors. Nothing too complicated, just fiddly work. I used six 18"x32" sheets of Dynamat, with better planning I might have been able to scrape by with five, as I had lots of offcuts.












The million dollar question, was it worth 6hrs labour and £100 of materials? Mmmm, not really.

I used a decibel meter app on my phone before and after, same stretch of road, speed limited to 60mph, stereo/aircon all off. Before on the left, after on the right. It dropped the average by 0.7dB, so not a vast improvement, although as decibels are a logarithmic measure, that's a bigger difference than it seems.

As my phone was mounted in a holder near the windscreen, I think that wind noise is the main factor. Interesting that the minimum level was far lower in the 'after' run, which suggests to me that at low speed (where road noise is a bigger factor), there was a more dramatic improvement.

Overall my perception of noise is that things seem more muted after installation and the stereo seems to be louder at a given volume setting.
So only really a modification for people who enjoy mucking around with their car, rather than an essential upgrade.