A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Hello everybody ive just got one half of my 3 inch lift kit.Having probs finding four shockers dont no which ones to fit.Im been told that the thick body shocks rub on the springs.Anybody have any clues as to what i can fit make and where to get them from.Thanks tiny
I run ES1000 shocks on mine and there is no problem with rubbing
the ES3000 as far as i know don't rub on the springs either
the ES9000 are thicker but with them been gas charged instead of oil
you can run with them inverted with no problems at all
DO the tyres rub or have you had to trim the arches out
thanks tim
Hi Tiny,
Errmmmm only a little bit on the rear of the front arch
around an inch by about three inch has been removed it sound's
worse than it is.
However, i have a 3" suspension lift and a 2" body lift.
Ideally i could do with trimming them all the way around
as they do rub ever so slightly on the rear when at max articulaton
which is not too often so i havn't bothered.
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.
