A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Replacement rear diff

  • andypandy
  • Topic Author
  • New Member
  • New Member
More
8 years 6 months ago #192320 by andypandy
Replacement rear diff was created by andypandy
Hi everyone, i'm a long time lurker with a 2005 VVT Jimny with an Auto gearbox.

It had a noisy diff when we bought it and its got gradually worse to the point now where there is significant backlash in the diff and more noise than before.

From the research i've done online it seems I need a 4.090 ratio diff and haven't had any luck finding one.

Does anyone know whereabouts I could source either a recon unit or failing that something secondhand?

I'm based in South Yorkshire.

Cheers,
Andy.

Please Log in or Create an account to join the conversation.

More
8 years 6 months ago #192326 by j999pre
Replied by j999pre on topic Replacement rear diff
Hi Andy. I have a vvt rear diff. It's a 4.3. I will check my and see what diffs vvt autos have. I thought they were the same as manuals. The non vvt auto is a 4.0909

Gold Jimny the best colour (sold) :(

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

More
8 years 6 months ago - 8 years 6 months ago #192328 by yakuza
Replied by yakuza on topic Replacement rear diff


any Jimny diff from any auto Jimny should fit.

Norway -84 SJ410, 87 SJ413 lwb, 88 sammy trailer.
2005 Jimny M16A VVT, 235 Cooper Disco, 2" Trailmaster, ARB rear lck.
Last edit: 8 years 6 months ago by yakuza.

Please Log in or Create an account to join the conversation.

  • andypandy
  • Topic Author
  • New Member
  • New Member
More
8 years 6 months ago #192331 by andypandy
Replied by andypandy on topic Replacement rear diff
Thanks Guys, I had already figured out that I needed a 4.090 diff but can't seem to find one anywhere.

Might be going down the route of replacing the pinion bearings and see if that makes any difference.

Please Log in or Create an account to join the conversation.

More
8 years 6 months ago #192338 by Riccy
Replied by Riccy on topic Replacement rear diff
Might as well replace the diff sidegear bearings and wheel bearings while its in bits, wouldn't be that much extra work and gives peace of mind ;-)

you could use 4.3 diffs if you changed both of them to match and used some larger tyres. it would work well.

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

  • andypandy
  • Topic Author
  • New Member
  • New Member
More
8 years 6 months ago #192605 by andypandy
Replied by andypandy on topic Replacement rear diff
OK, so I ordered a bearing repair kit from www.rsmfg.co.uk but haven't heard anything from them. No answer on the mobile number provided on the website.

Does anyone know if they are still in business?

Please Log in or Create an account to join the conversation.

Time to create page: 0.109 seconds
Joomla template by a4joomla

We use cookies

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.
CookieHint and Consent by reDim GmbH (Opens in a new window)