A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Lambda Sensor Question

  • Venter
  • Topic Author
  • New Member
  • New Member
    Public
More
10 May 2017 18:54 #181119 by Venter
Lambda Sensor Question was created by Venter
Anyone know what size spanner fits the 2nd lambda sensor (the lower one on the catalyst, "HO2S-2" in the service book))?

I've tried a 21mm but too small, so am thinking it's 23 or 24, but want to make sure I buy the right one tomorrow.

Car is 2003 (M13AA)

Please Log in or Create an account to join the conversation.

More
10 May 2017 19:18 #181120 by jackonlyjack
Replied by jackonlyjack on topic Lambda Sensor Question
i used 22mm ring spanner
also if you cut the clip bit off the connector it will then fit through the spanner ring
maybe just maybe you may need some scaffold tube to move it
i slotted 600mm of tube onto spanner ;)

Jack
The following user(s) said Thank You: Venter

Please Log in or Create an account to join the conversation.

  • Venter
  • Topic Author
  • New Member
  • New Member
    Public
More
10 May 2017 20:19 - 10 May 2017 20:19 #181122 by Venter
Replied by Venter on topic Lambda Sensor Question
Thanks Jack.

Wish I could get my breaker bar and socket in there, the mole grips gripped well but just didn't have the leverage, its stuck pretty tight in there.

What do you mean by cut the clip off? I just see the sensor sticking out of the cat and the wires leading from it, no clip (see pic).

I'm considering cutting the wires to so I can get the socket on, then just splicing wires back together and insulation taping them.

Last edit: 10 May 2017 20:19 by Venter.

Please Log in or Create an account to join the conversation.

More
10 May 2017 20:28 #181123 by jackonlyjack
Replied by jackonlyjack on topic Lambda Sensor Question
the connector is up back of head
it clips to a metal plate
the clip you cut off is the one that holds it to the plate
will post a pic soon ;)

Jack

Please Log in or Create an account to join the conversation.

More
10 May 2017 20:35 #181124 by jackonlyjack
Replied by jackonlyjack on topic Lambda Sensor Question
Don't cut this clip

Cut the one on opposite side
This one

Then slide spanner down the wires

Jack

Please Log in or Create an account to join the conversation.

  • Venter
  • Topic Author
  • New Member
  • New Member
    Public
More
10 May 2017 20:48 #181126 by Venter
Replied by Venter on topic Lambda Sensor Question
Ok, now I see.

Will give it a go in the morning, cheers!

Please Log in or Create an account to join the conversation.

Time to create page: 0.094 seconds
Joomla template by a4joomla

We use cookies

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.
CookieHint and Consent by reDim GmbH (Opens in a new window)