By Martin Lines on Friday, 28 January 2011
Category: Builds/Pictures

28/01/11 - Miguel's Jimny (UPDATED)

Miguels JimnyMiguel (living in Ireland but from Portugal!) has sent in pictures and details of his modifications to his Jimny. Many thanks for the great write up!

Here is my Jimny got it from a garage around 6 months ago. I few things I did to it andI will be updating as I can :).

The specification is...

New update from Miguel - 28/01/11

Adding the Snorkle

Removed the battery and air filter box

Wheel arch removed and template fixed in place with some masking tape

This was the most scary moment I had...but...it ended up perfect. I drilles a 32mm hole (because I could not find a 31mm hole saw). It worked fine for me.

Holes finished

I did some paint work. Just got tow paint cans, 1 primer and 1 sliver, just to keep the rust away as much as possible.

Job almost done

Transfer Case Protection

This is my transfer case protection. Home made but was slightly changed before the installation as I wasn't happy with some bits.

After some changes here and there I ended up with this.

Just a small lip for the exhaust

Differential Guards

Rock Slider

I have to get nicer pictures of the Rock Slider...will try the next time I am in the workshop

If you want to feature your Jimny on this website send some pictures and information to Martin (This email address is being protected from spambots. You need JavaScript enabled to view it.) in any layout/format and I will add it to the site

{kunena_discuss:10494}

Leave Comments