A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
help , MOT fail
- rooster
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
03 Jul 2012 14:52 #43440
by rooster
help , MOT fail was created by rooster
hi guys. jinboy failed mot today :blink: . only two problems though, exhaust silencer , easy one, second defect o/s/f swivel joint excessive play ? any help on this please , would it be kingpin or wheel bearing? . im sure someone has had this before . have not had a look myself yet just going on what mot man is saying. funny thing is the exhaust never sounded like it was blowing, i did ask if it could be welded but they said no it needs a new one. just waiting for them to quote me but might do it myself depending on the swivel joint ?
Please Log in or Create an account to join the conversation.
- bluejimny
- New Member
-

Public
Less
More
- Thank you received: 0
03 Jul 2012 16:11 #43446
by bluejimny
Replied by bluejimny on topic Re: help , MOT fail
i'd say kingpins for sure, quite common, there is a good write up on here
Please Log in or Create an account to join the conversation.
- rooster
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
03 Jul 2012 16:24 #43447
by rooster
Replied by rooster on topic Re: help , MOT fail
yep your right , just spoke to them now , up and down movement so kingpins it is. i have questioned the exhaust cause if it passed the emissions test the exhaust cant be bad enough to fail surely ?
Please Log in or Create an account to join the conversation.
- markyp2000
- New Member
-

Public
Less
More
- Thank you received: 0
03 Jul 2012 16:52 #43448
by markyp2000
Replied by markyp2000 on topic Re: help , MOT fail
what was the wording on the failure ticket for the exhaust
Please Log in or Create an account to join the conversation.
- rooster
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
03 Jul 2012 17:14 #43454
by rooster
Replied by rooster on topic Re: help , MOT fail
dont know about the wording yet . garage closed before i could get there but the guy i spoke to on the phone is a complete idiot. i have told them i will try to get down there tomorrow and inspect myself. i phoned and asked for him to clarify what work needed doing with regards to the swivel play and he said he was unsure , to which i replied how do you know what parts to quote for then? . i then told him what parts i wanted quoting for and he said , mot , silencer , o/s kingpin bearings and seal £300 all in. fitted (2hrs labour). i also asked has the silencer got a hole , is it split etc etc and his reply .... it just needs a new one! .i am thinking small hole if any as never heard it blowing.
Please Log in or Create an account to join the conversation.
- vitara_mad
- New Member
-

Public
Less
More
- Thank you received: 0
03 Jul 2012 17:30 #43457
by vitara_mad
Replied by vitara_mad on topic Re: help , MOT fail
£300 for a silencer , kingpin bearings for 1 side & a mot are they having a joke or what
sounds like a right muppet con man
sounds like a right muppet con man
Please Log in or Create an account to join the conversation.
Time to create page: 0.207 seconds
