Drive belts

From BigJimny Wiki
Revision as of 19:57, 16 May 2016 by Mlines (talk | contribs)
Jump to navigation Jump to search

Drive Belts

This section covers the engine drive belts, their configurations and adjustment.

There are a number of combinations and it is essential you get the correct belt.

G13BB with Power Steering

G13BB with PAS

Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner

G13BB with Power Steering and Aircon

G13BB with PAS and Aircon

Adjust horizontal (TOP) of belt to 3 – 4 mm (0.12 – 0.16 in.) of flex by adjusting tensioner

M13AA with Power Steering

M13AA with PAS

Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner

M13AA with Power Steering and Aircon

M13AA with PAS and Aircon

Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner

M13AA with Aircon

M13AA with PAS

Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner

Torque Settings

Full details of the torque settings can be found in the reference data


Page last edited on 16/05/2016 by user Mlines