Difference between revisions of "Drive belts"

From BigJimny Wiki
Jump to navigation Jump to search
Line 19: Line 19:
  
 
[[File:G13BB with Aircon.png|250px|thumb|left|G13BB with PAS and Aircon]]
 
[[File:G13BB with Aircon.png|250px|thumb|left|G13BB with PAS and Aircon]]
 +
* PAS: Adjust horizontal (TOP) of belt to 3 – 4 mm (0.12 – 0.16 in.) of flex by adjusting tensioner
 
[https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]
 
[https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]
* PAS: Adjust horizontal (TOP) of belt to 3 – 4 mm (0.12 – 0.16 in.) of flex by adjusting tensioner
 
 
<br clear=all>
 
<br clear=all>
  
Line 26: Line 26:
  
 
[[File:M13AA with PAS.png|250px|thumb|left|M13AA with PAS]]
 
[[File:M13AA with PAS.png|250px|thumb|left|M13AA with PAS]]
[https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]
 
 
* Auxillary Belt - known part number for some models '''95141-50F01'''
 
* Auxillary Belt - known part number for some models '''95141-50F01'''
 
*PAS:Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
 
*PAS:Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
 +
[https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]
 
<br clear=all>
 
<br clear=all>
  
Line 34: Line 34:
  
 
[[File:M13AA with Aircon_PAS.png|250px|thumb|left|M13AA with PAS and Aircon]]
 
[[File:M13AA with Aircon_PAS.png|250px|thumb|left|M13AA with PAS and Aircon]]
[https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]
 
 
* Auxillary Belt - known part number for some models '''95141-50F01'''  
 
* Auxillary Belt - known part number for some models '''95141-50F01'''  
 
* PAS+Aircon  Belt - known part number for some models '''17521-52E00'''  
 
* PAS+Aircon  Belt - known part number for some models '''17521-52E00'''  
 
*PAS: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
 
*PAS: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
 +
[https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]
 
<br clear=all>
 
<br clear=all>
  
Line 43: Line 43:
  
 
[[File:M13AA with Aircon.png|250px|thumb|left|M13AA with PAS]]
 
[[File:M13AA with Aircon.png|250px|thumb|left|M13AA with PAS]]
[https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]
 
 
* Auxillary Belt - known part number for some models '''95141-50F01'''  
 
* Auxillary Belt - known part number for some models '''95141-50F01'''  
 
* Aircon: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
 
* Aircon: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
 +
[https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]
 
<br clear=all>
 
<br clear=all>
  

Revision as of 08:03, 2 February 2017

Note Icon.pngThe content of any article might be expanded / improved in the future - revisit it sometimes.
Note Icon.pngSeen a mistake? Know something that isn't written? Edit and change this article yourself!
Note Icon.pngSome images in the article (if present) can be enlarged by clicking on them.


Drive Belts

This section covers the engine drive belts, their configurations and adjustment. The Jimny has an Auxillary Belt (Fan Belt) and a Power Steering Belt.

There are a number of combinations and it is essential you get the correct belt.

Warning Icon.pngDo not purchase based on guidance below - you must identify the correct belt for your vehicle.


G13BB with Power Steering

G13BB with PAS
  • PAS: Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner

Shop for V-Belts in BigJimny Shop

G13BB with Power Steering and Aircon

G13BB with PAS and Aircon
  • PAS: Adjust horizontal (TOP) of belt to 3 – 4 mm (0.12 – 0.16 in.) of flex by adjusting tensioner

Shop for V-Belts in BigJimny Shop

M13AA with Power Steering

M13AA with PAS
  • Auxillary Belt - known part number for some models 95141-50F01
  • PAS:Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner

Shop for V-Belts in BigJimny Shop

M13AA with Power Steering and Aircon

M13AA with PAS and Aircon
  • Auxillary Belt - known part number for some models 95141-50F01
  • PAS+Aircon Belt - known part number for some models 17521-52E00
  • PAS: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner

Shop for V-Belts in BigJimny Shop

M13AA with Aircon

M13AA with PAS
  • Auxillary Belt - known part number for some models 95141-50F01
  • Aircon: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner

Shop for V-Belts in BigJimny Shop

Tensioners

This section covers the Tensioners.

There basically two types of tensioner. One with a small centre and one with a large centre. The small ones are more common on the G13B engines and the large centre ones tend to be on the M13A series engines.

Warning Icon.pngDo not purchase based on guidance below - you must identify the correct tensioner for your vehicle.


Small hole tensioner

Small hole tensioner
  • This is Suzuki part number 49160-82A00.
  • If the bearing has worn, then it can be replaced by pressing the old bearing out.
  • A suitable bearing is available in the BigJimny Shop HERE


Large hole tensioner

Small hole tensioner
  • This is Suzuki part number 49160-81A00.
  • This tensioner is commonly called a "smilely tensioner" because of the appearance.
  • If the bearing has worn then it can be replaced by pressing the old bearing out of the outer rim and pressing the smilely centre out.
  • A suitable bearing is available in the BigJimny Shop HERE


Torque Settings

Full details of the torque settings can be found in the reference data


Page last edited on 2/02/2017 by user Mlines