Difference between revisions of "Drive belts"

From BigJimny Wiki
Jump to navigation Jump to search
Line 16: Line 16:
 
[[File:M13AA with PAS.png|250px|thumb|left|M13AA with PAS]]
 
[[File:M13AA with PAS.png|250px|thumb|left|M13AA with PAS]]
 
* Auxillary Belt - known part number for some models '''95141-50F01''' ''(4PK835)''
 
* Auxillary Belt - known part number for some models '''95141-50F01''' ''(4PK835)''
* PS Belt - known part numbers for some models '''17521-84H00''' ''(4PK950)'' or '''17521-52E00'''
+
* PS Belt - known part numbers for some models '''17521-84H00''' ''(4PK950)'' (2007 VVT) or '''17521-52E00''' ''(4PK850)'' (2005 VVT)
 
*PAS:Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
 
*PAS:Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
 
<br clear=all>
 
<br clear=all>

Revision as of 11:24, 19 May 2016

Drive Belts

This section covers the engine drive belts, their configurations and adjustment.

There are a number of combinations and it is essential you get the correct belt.

G13BB with Power Steering

G13BB with PAS
  • PAS: Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner


G13BB with Power Steering and Aircon

G13BB with PAS and Aircon
  • PAS: Adjust horizontal (TOP) of belt to 3 – 4 mm (0.12 – 0.16 in.) of flex by adjusting tensioner


M13AA with Power Steering

M13AA with PAS
  • Auxillary Belt - known part number for some models 95141-50F01 (4PK835)
  • PS Belt - known part numbers for some models 17521-84H00 (4PK950) (2007 VVT) or 17521-52E00 (4PK850) (2005 VVT)
  • PAS:Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner


M13AA with Power Steering and Aircon

M13AA with PAS and Aircon
  • Auxillary Belt - known part number for some models 95141-50F01 (4PK835)
  • PAS: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner


M13AA with Aircon

M13AA with PAS
  • Aircon: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner


Torque Settings

Full details of the torque settings can be found in the reference data


Page last edited on 19/05/2016 by user Mlines