The content of any article might be expanded / improved in the future - revisit it sometimes.
Seen a mistake? Know something that isn't written? Edit and change this article yourself!
Some images in the article (if present) can be enlarged by clicking on them.

Introduction

This article is just an embryo. It is an idea for someone to write. There is an older guide on doing this somewhere, so someone should just copy it here and adjust.

I know just one thing now:

It is very important to mount all the prop shafts back exactly as they were, because they were balanced for that position in the factory!

---

Page last edited on 27/01/2017 by user Bosanek [Category:Howto]]