Drive belts: Difference between revisions

From BigJimny Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 6: Line 6:
=== G13BB with Power Steering ===
=== G13BB with Power Steering ===
[[File:G13BB with PAS.png|250px|thumb|left|G13BB with PAS]]
[[File:G13BB with PAS.png|250px|thumb|left|G13BB with PAS]]
Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
* PAS: Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
<br clear=all>
<br clear=all>


=== G13BB with Power Steering and Aircon ===
=== G13BB with Power Steering and Aircon ===
[[File:G13BB with Aircon.png|250px|thumb|left|G13BB with PAS and Aircon]]
[[File:G13BB with Aircon.png|250px|thumb|left|G13BB with PAS and Aircon]]
Adjust horizontal (TOP) of belt to 3 – 4 mm (0.12 – 0.16 in.) of flex by adjusting tensioner
* PAS: Adjust horizontal (TOP) of belt to 3 – 4 mm (0.12 – 0.16 in.) of flex by adjusting tensioner
<br clear=all>
<br clear=all>
=== M13AA with Power Steering ===
=== M13AA with Power Steering ===
Line 20: Line 20:
=== M13AA with Power Steering and Aircon ===
=== M13AA with Power Steering and Aircon ===
[[File:M13AA with Aircon_PAS.png|250px|thumb|left|M13AA with PAS and Aircon]]
[[File:M13AA with Aircon_PAS.png|250px|thumb|left|M13AA with PAS and Aircon]]
Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
*PAS: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
<br clear=all>
<br clear=all>


=== M13AA with Aircon ===
=== M13AA with Aircon ===
[[File:M13AA with Aircon.png|250px|thumb|left|M13AA with PAS]]
[[File:M13AA with Aircon.png|250px|thumb|left|M13AA with PAS]]
Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
* Aircon: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner
<br clear=all>
<br clear=all>
=== Torque Settings ===
=== Torque Settings ===

Revision as of 20:00, 16 May 2016

Drive Belts

This section covers the engine drive belts, their configurations and adjustment.

There are a number of combinations and it is essential you get the correct belt.

G13BB with Power Steering

G13BB with PAS
  • PAS: Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner


G13BB with Power Steering and Aircon

G13BB with PAS and Aircon
  • PAS: Adjust horizontal (TOP) of belt to 3 – 4 mm (0.12 – 0.16 in.) of flex by adjusting tensioner


M13AA with Power Steering

M13AA with PAS

Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner

M13AA with Power Steering and Aircon

M13AA with PAS and Aircon
  • PAS: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner


M13AA with Aircon

M13AA with PAS
  • Aircon: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner


Torque Settings

Full details of the torque settings can be found in the reference data


Page last edited on 16/05/2016 by user Mlines