<?xml version="1.0"?>
<feed xmlns="http://www.w3.org/2005/Atom" xml:lang="en-GB">
	<id>https://www.bigjimny.com/mediawiki/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=4xPhil</id>
	<title>BigJimny Wiki - User contributions [en-gb]</title>
	<link rel="self" type="application/atom+xml" href="https://www.bigjimny.com/mediawiki/api.php?action=feedcontributions&amp;feedformat=atom&amp;user=4xPhil"/>
	<link rel="alternate" type="text/html" href="https://www.bigjimny.com/mediawiki/index.php/Special:Contributions/4xPhil"/>
	<updated>2026-11-16T16:48:53Z</updated>
	<subtitle>User contributions</subtitle>
	<generator>MediaWiki 1.46.2</generator>
	<entry>
		<id>https://www.bigjimny.com/mediawiki/index.php?title=Drive_belts&amp;diff=9888</id>
		<title>Drive belts</title>
		<link rel="alternate" type="text/html" href="https://www.bigjimny.com/mediawiki/index.php?title=Drive_belts&amp;diff=9888"/>
		<updated>2021-10-12T16:11:32Z</updated>

		<summary type="html">&lt;p&gt;4xPhil: /* M13A with P.S. but without A.C. */ changed M13A back to M13AA, didn&amp;#039;t realise this wasn&amp;#039;t a typo!&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{intro-notes}}&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Introduction ==&lt;br /&gt;
&lt;br /&gt;
{{Gen3|}}{{Gen4|}}&lt;br /&gt;
* This article deals with the engine drive belts and associated tensioners, their configurations and adjustment.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
* Petrol Jimnys have an auxiliary belt (fan belt) and a power steering belt.&lt;br /&gt;
** There are a number of combinations and it is essential you get the correct belt.&lt;br /&gt;
* Diesel Jimnys have one auxiliary belt which drives all auxiliary engine devices.&lt;br /&gt;
&lt;br /&gt;
{{warning|You should not purchase based on guidance below - you should identify the correct belt for &#039;&#039;&#039;your&#039;&#039;&#039; vehicle elsewhere.}}&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Nomenclature ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
For shorter naming, these abbreviations and designations will be used in this article:&lt;br /&gt;
* P.S. - Power Steering&lt;br /&gt;
* A.C. - Air Conditioning&lt;br /&gt;
* G13BB - petrol engine, used in very early petrol Jimnys 3 and many cabrio / open top petrol Jimnys 3;&lt;br /&gt;
* M13A / M13AA / M13A VVT - family of petrol engines, used in most petrol Jimnys 3 from 2001 to 2018;&lt;br /&gt;
** All variants of this engine are effectively the same from the &amp;quot;drive belt choice&amp;quot; perspective;&lt;br /&gt;
* K9K - Renault&#039;s diesel engine, used in all diesel Jimnys 3;&lt;br /&gt;
** This engine exists in two variants, but both are effectively the same from the &amp;quot;drive belt choice&amp;quot; perspective;&lt;br /&gt;
* K15B - petrol engine, used in Jimnys 4;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Belt details ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
* Suzuki belt P.N. &amp;lt;font face=&amp;quot;Courier&amp;quot;&amp;gt;95141-50F01&amp;lt;/font&amp;gt; has universal parameters &amp;lt;font face=&amp;quot;Courier&amp;quot;&amp;gt;4PK835&amp;lt;/font&amp;gt; and was originally installed in a Jimny 3 with M13A VVT engine, made in 2013, with P.S. and A.C.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Belt configurations ==&lt;br /&gt;
&lt;br /&gt;
{{Gen3|}}{{Gen4|}}&lt;br /&gt;
=== G13BB with P.S. but without A.C. ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[File:G13BB with PAS.png|250px|thumb|left|G13BB with P.S.]]&lt;br /&gt;
* P.S.: Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner&lt;br /&gt;
* [https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]&lt;br /&gt;
&amp;lt;br clear=all&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== G13BB with P.S. and with A.C. ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[File:G13BB with Aircon.png|250px|thumb|left|G13BB with P.S. and A.C.]]&lt;br /&gt;
* P.S.: Adjust horizontal (TOP) of belt to 3 – 4 mm (0.12 – 0.16 in.) of flex by adjusting tensioner&lt;br /&gt;
* [https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]&lt;br /&gt;
&amp;lt;br clear=all&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== M13AA with P.S. but without A.C. ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[File:M13AA with PAS.png|250px|thumb|left|M13AA with P.S.]]&lt;br /&gt;
* Auxillary Belt - known part number for some models &#039;&#039;&#039;95141-50F01&#039;&#039;&#039;&lt;br /&gt;
*P.S. Belt - known part numbers for some models &#039;&#039;&#039;17521-84H00&#039;&#039;&#039; or &#039;&#039;&#039;49180-60B20&#039;&#039;&#039;&lt;br /&gt;
* P.S.:Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner&lt;br /&gt;
* [https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]&lt;br /&gt;
&amp;lt;br clear=all&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=== M13AA with P.S. and with A.C. ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[File:M13AA with Aircon_PAS.png|250px|thumb|left|M13AA with P.S. and A.C.]]&lt;br /&gt;
* Auxillary Belt - known part number for some models &#039;&#039;&#039;95141-50F01&#039;&#039;&#039; &lt;br /&gt;
* P.S.+A.C.  Belt - known part number for some models &#039;&#039;&#039;17521-52E00&#039;&#039;&#039; &lt;br /&gt;
* P.S.: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner&lt;br /&gt;
* [https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]&lt;br /&gt;
&amp;lt;br clear=all&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== M13AA without P.S. but with A.C. ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[File:M13AA with Aircon.png|250px|thumb|left|M13AA with P.S.]]&lt;br /&gt;
* Auxillary Belt - known part number for some models &#039;&#039;&#039;95141-50F01&#039;&#039;&#039; &lt;br /&gt;
* A.C.: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner&lt;br /&gt;
* [https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]&lt;br /&gt;
&amp;lt;br clear=all&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== K9K ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
* &#039;&#039; Info needed ...&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== K15B ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
* &#039;&#039; Info needed ...&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Tensioners for Jimnys 3 ==&lt;br /&gt;
&lt;br /&gt;
{{Gen3|}}&lt;br /&gt;
There basically two types of tensioners for petrol Jimnys 3:&lt;br /&gt;
* One with a small center;&lt;br /&gt;
** These are more common on the G13B engines;&lt;br /&gt;
* One with a large center;&lt;br /&gt;
** There are more common on the M13A family of engines;&lt;br /&gt;
&lt;br /&gt;
{{warning|You should not purchase based on guidance below - you should identify the correct tensioner for your vehicle.}}&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== Small hole tensioner ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[File:G13B_tensioner.jpg|250px|thumb|left|Small hole tensioner]]&lt;br /&gt;
&lt;br /&gt;
* This is Suzuki part number 49160-82A00.&lt;br /&gt;
* If the bearing has worn, then it can be replaced by pressing the old bearing out.&lt;br /&gt;
* A suitable bearing is available in the [https://www.bigjimny.com/store/power-steering-tensioner-bearing.html BigJimny Shop HERE]&lt;br /&gt;
&amp;lt;br clear=all&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== Large hole tensioner ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[File:M13AA_tensioner.jpg|250px|thumb|left|Small hole tensioner]]&lt;br /&gt;
&lt;br /&gt;
* This is Suzuki part number 49160-81A00.&lt;br /&gt;
* This tensioner is commonly called a &amp;quot;smilely tensioner&amp;quot; because of the appearance.&lt;br /&gt;
* If the bearing has worn then it can be replaced by pressing the old bearing out of the outer rim and pressing the smilely centre out.&lt;br /&gt;
* A suitable bearing is available in the [https://www.bigjimny.com/store/power-steering-tensioner-bearing-m13a.html BigJimny Shop HERE]&lt;br /&gt;
&amp;lt;br clear=all&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
==== Replacements ====&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
* First of all, the BigJimny shop has a high quality replacement bearing for sale (read above).&lt;br /&gt;
* However, if you for some reason want to replace the entire tensioner assembly (generally a lot more expensive), you can either buy the original Suzuki P.N. 49160-81A00, or one of the aftermarket tensioners.&lt;br /&gt;
** Example aftermarket tensioner is [https://www.vsm.skf.com/uk/en/products/VKM66009 SKF VKM66009]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
* By the way, the bearing which Suzuki originally installs in this tensioner is NSK 6010DU2 (that&#039;s at least the case in M13A engined Jimnys made in 2013).&lt;br /&gt;
** That bearing has rubber seals on both sides.&lt;br /&gt;
** Specifications are: single-row, ball bearings, deep groove, 50 x 80 x 16 mm&lt;br /&gt;
* NSK has allegedly superseded it with the bearing model [https://www.jp.nsk.com/app02/NSKOnlineCatalog/en/bearing/detail.jsp?Prod_Type1=DGBB&amp;amp;Prod_Type2=DGBB_SR&amp;amp;Prod_Type3=DGBB_SR_DD&amp;amp;yobi=6010DDU 6010DDU].&lt;br /&gt;
** However, since the specifications of those two bearings appear to be the same, it could very well be the same bearing, but just a changed naming nomenclature.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
* There is also a &amp;quot;premium&amp;quot; edition of this bearing.&lt;br /&gt;
** It is [https://www.jp.nsk.com/app02/NSKOnlineCatalog/en/bearing/detail.jsp?Prod_Type1=DGBB&amp;amp;Prod_Type2=DGBB_SR&amp;amp;Prod_Type3=DGBB_SR_VV&amp;amp;yobi=6010VV NSK 6010VV].&lt;br /&gt;
* The &amp;quot;VV&amp;quot; suffix means that is has special &amp;quot;contactless&amp;quot; double sided rubber seals (and made of some super tech rubber), which effectively allow far higher bearing RPMs and operating temperatures.&lt;br /&gt;
** However, this premium bearing is about 3x more expensive than the &amp;quot;ordinary&amp;quot; one.&lt;br /&gt;
* This premium bearing may be an &amp;quot;overkill&amp;quot; for this application (in other words, the standard bearing may be sufficient), but an expert should give an opinion.&lt;br /&gt;
** However, if someone wants to indulge themselves with this premium bearing edition (instead of using chocolate or sex dolls for a change), then buy NSK 6010VV.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Tensioners for Jimnys 4 ==&lt;br /&gt;
&lt;br /&gt;
{{Gen3|}}{{Gen4|}}&lt;br /&gt;
&#039;&#039;Info needed ...&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Torque Settings ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Full details of the torque settings can be found in the [[Torque#Engine | reference data]]&lt;br /&gt;
&lt;br /&gt;
{{Edited}}&lt;br /&gt;
&lt;br /&gt;
[[Category:Howto - gen3]]&lt;br /&gt;
[[Category:Engine - gen3]]&lt;br /&gt;
&lt;br /&gt;
[[Category:Howto - gen4]]&lt;br /&gt;
[[Category:Engine - gen4]]&lt;/div&gt;</summary>
		<author><name>4xPhil</name></author>
	</entry>
	<entry>
		<id>https://www.bigjimny.com/mediawiki/index.php?title=Drive_belts&amp;diff=9887</id>
		<title>Drive belts</title>
		<link rel="alternate" type="text/html" href="https://www.bigjimny.com/mediawiki/index.php?title=Drive_belts&amp;diff=9887"/>
		<updated>2021-10-12T16:08:54Z</updated>

		<summary type="html">&lt;p&gt;4xPhil: /* M13AA with P.S. but without A.C. */ added known part numbers for M13A with P.S. but without A.C.&lt;/p&gt;
&lt;hr /&gt;
&lt;div&gt;{{intro-notes}}&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Introduction ==&lt;br /&gt;
&lt;br /&gt;
{{Gen3|}}{{Gen4|}}&lt;br /&gt;
* This article deals with the engine drive belts and associated tensioners, their configurations and adjustment.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
* Petrol Jimnys have an auxiliary belt (fan belt) and a power steering belt.&lt;br /&gt;
** There are a number of combinations and it is essential you get the correct belt.&lt;br /&gt;
* Diesel Jimnys have one auxiliary belt which drives all auxiliary engine devices.&lt;br /&gt;
&lt;br /&gt;
{{warning|You should not purchase based on guidance below - you should identify the correct belt for &#039;&#039;&#039;your&#039;&#039;&#039; vehicle elsewhere.}}&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Nomenclature ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
For shorter naming, these abbreviations and designations will be used in this article:&lt;br /&gt;
* P.S. - Power Steering&lt;br /&gt;
* A.C. - Air Conditioning&lt;br /&gt;
* G13BB - petrol engine, used in very early petrol Jimnys 3 and many cabrio / open top petrol Jimnys 3;&lt;br /&gt;
* M13A / M13AA / M13A VVT - family of petrol engines, used in most petrol Jimnys 3 from 2001 to 2018;&lt;br /&gt;
** All variants of this engine are effectively the same from the &amp;quot;drive belt choice&amp;quot; perspective;&lt;br /&gt;
* K9K - Renault&#039;s diesel engine, used in all diesel Jimnys 3;&lt;br /&gt;
** This engine exists in two variants, but both are effectively the same from the &amp;quot;drive belt choice&amp;quot; perspective;&lt;br /&gt;
* K15B - petrol engine, used in Jimnys 4;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Belt details ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
* Suzuki belt P.N. &amp;lt;font face=&amp;quot;Courier&amp;quot;&amp;gt;95141-50F01&amp;lt;/font&amp;gt; has universal parameters &amp;lt;font face=&amp;quot;Courier&amp;quot;&amp;gt;4PK835&amp;lt;/font&amp;gt; and was originally installed in a Jimny 3 with M13A VVT engine, made in 2013, with P.S. and A.C.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Belt configurations ==&lt;br /&gt;
&lt;br /&gt;
{{Gen3|}}{{Gen4|}}&lt;br /&gt;
=== G13BB with P.S. but without A.C. ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[File:G13BB with PAS.png|250px|thumb|left|G13BB with P.S.]]&lt;br /&gt;
* P.S.: Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner&lt;br /&gt;
* [https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]&lt;br /&gt;
&amp;lt;br clear=all&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== G13BB with P.S. and with A.C. ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[File:G13BB with Aircon.png|250px|thumb|left|G13BB with P.S. and A.C.]]&lt;br /&gt;
* P.S.: Adjust horizontal (TOP) of belt to 3 – 4 mm (0.12 – 0.16 in.) of flex by adjusting tensioner&lt;br /&gt;
* [https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]&lt;br /&gt;
&amp;lt;br clear=all&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== M13A with P.S. but without A.C. ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[File:M13AA with PAS.png|250px|thumb|left|M13A with P.S.]]&lt;br /&gt;
* Auxillary Belt - known part number for some models &#039;&#039;&#039;95141-50F01&#039;&#039;&#039;&lt;br /&gt;
*P.S. Belt - known part numbers for some models &#039;&#039;&#039;17521-84H00&#039;&#039;&#039; or &#039;&#039;&#039;49180-60B20&#039;&#039;&#039;&lt;br /&gt;
* P.S.:Adjust mid point of belt between Pump and Crank (lower belt section) to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner&lt;br /&gt;
* [https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]&lt;br /&gt;
&amp;lt;br clear=all&amp;gt;&lt;br /&gt;
&lt;br /&gt;
=== M13AA with P.S. and with A.C. ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[File:M13AA with Aircon_PAS.png|250px|thumb|left|M13AA with P.S. and A.C.]]&lt;br /&gt;
* Auxillary Belt - known part number for some models &#039;&#039;&#039;95141-50F01&#039;&#039;&#039; &lt;br /&gt;
* P.S.+A.C.  Belt - known part number for some models &#039;&#039;&#039;17521-52E00&#039;&#039;&#039; &lt;br /&gt;
* P.S.: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner&lt;br /&gt;
* [https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]&lt;br /&gt;
&amp;lt;br clear=all&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== M13AA without P.S. but with A.C. ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[File:M13AA with Aircon.png|250px|thumb|left|M13AA with P.S.]]&lt;br /&gt;
* Auxillary Belt - known part number for some models &#039;&#039;&#039;95141-50F01&#039;&#039;&#039; &lt;br /&gt;
* A.C.: Adjust horizontal (bottom) of belt to 6 – 9 mm (0.24 – 0.35 in.) of flex by adjusting tensioner&lt;br /&gt;
* [https://www.bigjimny.com/store/belts.html Shop for V-Belts in BigJimny Shop]&lt;br /&gt;
&amp;lt;br clear=all&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== K9K ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
* &#039;&#039; Info needed ...&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== K15B ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
* &#039;&#039; Info needed ...&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Tensioners for Jimnys 3 ==&lt;br /&gt;
&lt;br /&gt;
{{Gen3|}}&lt;br /&gt;
There basically two types of tensioners for petrol Jimnys 3:&lt;br /&gt;
* One with a small center;&lt;br /&gt;
** These are more common on the G13B engines;&lt;br /&gt;
* One with a large center;&lt;br /&gt;
** There are more common on the M13A family of engines;&lt;br /&gt;
&lt;br /&gt;
{{warning|You should not purchase based on guidance below - you should identify the correct tensioner for your vehicle.}}&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== Small hole tensioner ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[File:G13B_tensioner.jpg|250px|thumb|left|Small hole tensioner]]&lt;br /&gt;
&lt;br /&gt;
* This is Suzuki part number 49160-82A00.&lt;br /&gt;
* If the bearing has worn, then it can be replaced by pressing the old bearing out.&lt;br /&gt;
* A suitable bearing is available in the [https://www.bigjimny.com/store/power-steering-tensioner-bearing.html BigJimny Shop HERE]&lt;br /&gt;
&amp;lt;br clear=all&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
=== Large hole tensioner ===&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
[[File:M13AA_tensioner.jpg|250px|thumb|left|Small hole tensioner]]&lt;br /&gt;
&lt;br /&gt;
* This is Suzuki part number 49160-81A00.&lt;br /&gt;
* This tensioner is commonly called a &amp;quot;smilely tensioner&amp;quot; because of the appearance.&lt;br /&gt;
* If the bearing has worn then it can be replaced by pressing the old bearing out of the outer rim and pressing the smilely centre out.&lt;br /&gt;
* A suitable bearing is available in the [https://www.bigjimny.com/store/power-steering-tensioner-bearing-m13a.html BigJimny Shop HERE]&lt;br /&gt;
&amp;lt;br clear=all&amp;gt;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
==== Replacements ====&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
* First of all, the BigJimny shop has a high quality replacement bearing for sale (read above).&lt;br /&gt;
* However, if you for some reason want to replace the entire tensioner assembly (generally a lot more expensive), you can either buy the original Suzuki P.N. 49160-81A00, or one of the aftermarket tensioners.&lt;br /&gt;
** Example aftermarket tensioner is [https://www.vsm.skf.com/uk/en/products/VKM66009 SKF VKM66009]&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
* By the way, the bearing which Suzuki originally installs in this tensioner is NSK 6010DU2 (that&#039;s at least the case in M13A engined Jimnys made in 2013).&lt;br /&gt;
** That bearing has rubber seals on both sides.&lt;br /&gt;
** Specifications are: single-row, ball bearings, deep groove, 50 x 80 x 16 mm&lt;br /&gt;
* NSK has allegedly superseded it with the bearing model [https://www.jp.nsk.com/app02/NSKOnlineCatalog/en/bearing/detail.jsp?Prod_Type1=DGBB&amp;amp;Prod_Type2=DGBB_SR&amp;amp;Prod_Type3=DGBB_SR_DD&amp;amp;yobi=6010DDU 6010DDU].&lt;br /&gt;
** However, since the specifications of those two bearings appear to be the same, it could very well be the same bearing, but just a changed naming nomenclature.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
* There is also a &amp;quot;premium&amp;quot; edition of this bearing.&lt;br /&gt;
** It is [https://www.jp.nsk.com/app02/NSKOnlineCatalog/en/bearing/detail.jsp?Prod_Type1=DGBB&amp;amp;Prod_Type2=DGBB_SR&amp;amp;Prod_Type3=DGBB_SR_VV&amp;amp;yobi=6010VV NSK 6010VV].&lt;br /&gt;
* The &amp;quot;VV&amp;quot; suffix means that is has special &amp;quot;contactless&amp;quot; double sided rubber seals (and made of some super tech rubber), which effectively allow far higher bearing RPMs and operating temperatures.&lt;br /&gt;
** However, this premium bearing is about 3x more expensive than the &amp;quot;ordinary&amp;quot; one.&lt;br /&gt;
* This premium bearing may be an &amp;quot;overkill&amp;quot; for this application (in other words, the standard bearing may be sufficient), but an expert should give an opinion.&lt;br /&gt;
** However, if someone wants to indulge themselves with this premium bearing edition (instead of using chocolate or sex dolls for a change), then buy NSK 6010VV.&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Tensioners for Jimnys 4 ==&lt;br /&gt;
&lt;br /&gt;
{{Gen3|}}{{Gen4|}}&lt;br /&gt;
&#039;&#039;Info needed ...&#039;&#039;&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
== Torque Settings ==&lt;br /&gt;
&lt;br /&gt;
&lt;br /&gt;
Full details of the torque settings can be found in the [[Torque#Engine | reference data]]&lt;br /&gt;
&lt;br /&gt;
{{Edited}}&lt;br /&gt;
&lt;br /&gt;
[[Category:Howto - gen3]]&lt;br /&gt;
[[Category:Engine - gen3]]&lt;br /&gt;
&lt;br /&gt;
[[Category:Howto - gen4]]&lt;br /&gt;
[[Category:Engine - gen4]]&lt;/div&gt;</summary>
		<author><name>4xPhil</name></author>
	</entry>
</feed>