BigJimnyMeet (North) 2020

Its the big one! The 50th 51st Anniversary of the Jimny.

WE ARE BACK! - SUNDAY 11th July 2021

Parkwood (Tong - near Leeds)

New - Special gift from Suzuki for the first 70 bookings!!

Event details are HERE


BigJimnyMeet (North) 2021 - Current attendees -

Welcome to BigJimny

BigJimny is YOUR resource for everything to do with Suzuki Jimnys.
If you are new to the site then REGISTER through the LOGIN button

There is a friendly, active FORUM to discuss Jimny related subjects and a web SHOP for all your parts needs.

AS WITH ALL WEBSITES YOUR ATTENTION IS DRAWN TO THE DISCLAIMERS . As this website does not require a login to access content, the accessing of this website and associated resources is deemed acceptance of these DISCLAIMERS. Do NOT progress if you do not accept the DISCLAIMERS

28/06/08 - The Trailing Arms (not the name of a pub!)

So the loud clonk (see HERE ) has been located.

I took off the wheels and removed the rear trailing arms. At first the arms looked ok, whilst the rubbers show signs of wear they are certainly not worn out. However a glance back at the mounting point showed the real source of the problem....


Continue reading
  4771 Hits
4771 Hits

26/6/08 - A loud clonk!

My Jimny has gained a significant clonk when letting up the clutch, there is also a lot of drive chain "shunt" and rubber "squeaking" whenever the back axle is exercised in any way.

I have crawled underneath and pushed and pulled things.
Continue reading
  6268 Hits
6268 Hits

18/6/08 - Damaged axle - update

When I returned from Avon Dassett the other week my rear wheel bearing had failed.

I have replaced the wheel bearing and just taken the car for a test drive.

There is a lound "Rub Rub Rub" noise, consistent with the rotating of the wheel. Its loud enough to almost be a "Clunk Clunk Clunk" noise.

The noise stops when I gently apply the brakes whilst driving.

I have stripped the drum off and I think I can feel some sort of "Rub" in the system as I rotate the axle shaft by hand.

I have also taken this video of what looks like a wobble, but perhaps the centre ring is not straight anyway?

Is the axle shaft bent? Is the axle housing bent. Strangely enough when I had the shaft out I did think I saw a slight twist in the splines.

So now I have had a quick look

Continue reading
  5872 Hits
5872 Hits

08/06/08 - Rons' Jimny

Here is a real little beauty we came across at the AWDC event at Hogmoor today.

Continue reading
  8951 Hits
8951 Hits

2/6/08 - More drive train issues

Well following my day out and the June 2008 TV4x4 event at Avon Dassett a few more problems raised their ugly heads. We had a good days driving but it is a long haul back on the motorway for such a small, modified vehicle and it really took its toll.

Continue reading
  4973 Hits
4973 Hits

By accepting you will be accessing a service provided by a third-party external to

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.