-
Forum
-
Suzuki Jimny
-
Jimny Chat
-
No 4wd drive and flashing 4wd light
×
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
No 4wd drive and flashing 4wd light
-
marcusleighus
-
Topic Author
-
Visitor
-
Public
17 Dec 2017 15:57 #187576
by marcusleighus
I was driving this morning with the ECU unplugged all of a sudden the 4wd engaged, i plugged in the ECU and the flashing 4wd light was stationary and when I pressed 2wd it went straight back in with no issues whatsoever???
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 6250
-
Thank you received: 1449
-
Points: 14438.00
-
-
-
-
-
-
17 Dec 2017 16:15 #187577
by mlines
That's a common problem as well, the actuator gets out of sync with where the controller thinks it is. Sound like you have effectivity reset it although the more common way is to wind the actuator back to 2wd
Sent from my Nexus 6P using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
-
marcusleighus
-
Topic Author
-
Visitor
-
Public
17 Dec 2017 16:17 #187578
by marcusleighus
Do you think a missing hub nut potentially have anything to do with 4wd problems? I noticed one was missing when removing them
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 6250
-
Thank you received: 1449
-
Points: 14438.00
-
-
-
-
-
-
17 Dec 2017 17:03 #187579
by mlines
You mean the large hub nut or do you mean the bolts that hold the vacuum hub in place. Either way it would have trouble holding vacuum
Sent from my Nexus 6P using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
-
marcusleighus
-
Topic Author
-
Visitor
-
Public
17 Dec 2017 17:22 #187580
by marcusleighus
The bolts that hold the vacuum hub in place there’s 5 out of the 6.. so that could be a possible cause??
Please Log in or Create an account to join the conversation.
Less
More
-
Posts: 6250
-
Thank you received: 1449
-
Points: 14438.00
-
-
-
-
-
-
17 Dec 2017 17:29 #187581
by mlines
It would not have given the flashing message about the actuator sensor switches
Sent from my Nexus 6P using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
-
Forum
-
Suzuki Jimny
-
Jimny Chat
-
No 4wd drive and flashing 4wd light
Time to create page: 0.108 seconds