×
BigJimnyMeet (North) 2024 (12 Jan 2024)
BigJimnyMeet 2024
14th July 2024
Parkwood Nr. Leeds
14th July 2024
Parkwood Nr. Leeds
Booking now open - Discount for additional vehicles
Click HERE for details
Click HERE for details
×
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Help needed Re soft top fitment
- ninjaferret
- Topic Author
- Visitor
-
Public
13 Oct 2017 14:46 #185175
by ninjaferret
Help needed Re soft top fitment was created by ninjaferret
Hello, hope someone can help, i've recently bought a new soft top for my jimny, the problem is i seem to be missing 2 pieces from the very back corners. The soft top manufacturer tells me there should be 2 plastic pieces [ one each corner ] already fitted to my jimny these join the fitting rail, with the velcro on, if that makes sense . Has anyone got any or does anyone know where i can get some please?
Any help greatly appreciated.
Any help greatly appreciated.
Please Log in or Create an account to join the conversation.
- ninjaferret
- Topic Author
- Visitor
-
Public
14 Oct 2017 19:38 #185228
by ninjaferret
Replied by ninjaferret on topic Help needed Re soft top fitment
No one with an idea ?
Please Log in or Create an account to join the conversation.
14 Oct 2017 19:50 #185230
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Help needed Re soft top fitment
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- ninjaferret
- Topic Author
- Visitor
-
Public
14 Oct 2017 23:59 #185241
by ninjaferret
Replied by ninjaferret on topic Help needed Re soft top fitment
A little, looks like it could be 15 and 16 rear corner retainers?
Please Log in or Create an account to join the conversation.
- GRAYWOLF
- Visitor
-
Public
15 Oct 2017 18:58 #185256
by GRAYWOLF
Replied by GRAYWOLF on topic Help needed Re soft top fitment
Hi, original Jimny soft top, doesnt have these fitted, as far as i am aware, mine came with original top, however, as the rails at one side were rusting badly, i bought a set .the replacement set has both side rails, rear rail.AND the two corner pieces you mention..
Dont know if you can buy them direct from Suzuki.
Regards.
Dont know if you can buy them direct from Suzuki.
Regards.
Please Log in or Create an account to join the conversation.
- ninjaferret
- Topic Author
- Visitor
-
Public
17 Oct 2017 06:52 #185316
by ninjaferret
Replied by ninjaferret on topic Help needed Re soft top fitment
That's what i was dreading, thanks for your replys
Please Log in or Create an account to join the conversation.
17 Oct 2017 07:31 #185318
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Help needed Re soft top fitment
Only the left hand one is still available from Suzuki, £5.50 plus postage.
The other had been discontinued, as it is a soft top part they no longer produce them so when the spares run out that is it.
Sent from my Nexus 6P using Tapatalk
The other had been discontinued, as it is a soft top part they no longer produce them so when the spares run out that is it.
Sent from my Nexus 6P using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
17 Oct 2017 12:20 #185321
by Busta
Replied by Busta on topic Help needed Re soft top fitment
Speak to Monsoon4x4. They do soft tops and do the conversion kit to fit a mk2 hood in place of a mk1. Ir sounds like this, or part of it, is what you are after.
Please Log in or Create an account to join the conversation.
- ninjaferret
- Topic Author
- Visitor
-
Public
22 Oct 2017 21:24 #185435
by ninjaferret
Replied by ninjaferret on topic Re:Help needed Re soft top fitment
Would you have a part number please?
Please Log in or Create an account to join the conversation.
- ninjaferret
- Topic Author
- Visitor
-
Public
25 Oct 2017 17:16 #185513
by ninjaferret
Replied by ninjaferret on topic Re:Help needed Re soft top fitment
Would you have a part number please?
Please Log in or Create an account to join the conversation.
- ninjaferret
- Topic Author
- Visitor
-
Public
31 Oct 2017 20:17 #185692
by ninjaferret
Replied by ninjaferret on topic Re:Help needed Re soft top fitment
Only the left hand one is still available from Suzuki, £5.50 plus postage.
The other had been discontinued, as it is a soft top part they no longer produce them so when the spares run out that is it.
Sent from my Nexus 6P using Tapatalk
Could you tell me what the part is called please?
The other had been discontinued, as it is a soft top part they no longer produce them so when the spares run out that is it.
Sent from my Nexus 6P using Tapatalk
Could you tell me what the part is called please?
Please Log in or Create an account to join the conversation.
- ninjaferret
- Topic Author
- Visitor
-
Public
18 Nov 2017 19:58 #186430
by ninjaferret
Replied by ninjaferret on topic Re:Help needed Re soft top fitment
Gent's I'm still trying to find out what the above part is called or indeed a part number ?
Any help greatly appreciated
Any help greatly appreciated
Please Log in or Create an account to join the conversation.
Time to create page: 0.147 seconds