×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Headliner Rocker Switch Installation

  • zukebob
  • zukebob's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
    Registered
  • Manila, Philippines
More
13 Oct 2017 03:27 - 13 Oct 2017 03:35 #185154 by zukebob
I saw that one of the Bigjimny members (credit to sponnie) installed rocker switches in the headliner near the rear view mirror.



Has anyone else located switches here? Before cutting my headliner, I would like to know if there is any modification required for the switch spades.

Thanks

I started out with nothing & still have most of it left
Attachments:
Last edit: 13 Oct 2017 03:35 by zukebob.

Please Log in or Create an account to join the conversation.

  • Riccy
  • Riccy's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • J999 MNY Bashing around Carlisle
More
13 Oct 2017 17:21 #185183 by Riccy
There is a fair bit of room behind the area in that pic so i would think its possible. Isulated spade connectors would be a must however!

I made my own variation with a home made vaccum forming machine which works pretty well, apart from being a bit far back...




J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus
Attachments:
The following user(s) said Thank You: zukebob

Please Log in or Create an account to join the conversation.

  • zukebob
  • zukebob's Avatar Topic Author
  • Offline
  • Platinum Member
  • Platinum Member
    Registered
  • Manila, Philippines
More
14 Oct 2017 00:18 #185199 by zukebob
Thanks for the feedback Riccy. Looks like a well done setup.

I started out with nothing & still have most of it left

Please Log in or Create an account to join the conversation.

Time to create page: 0.090 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.